# Kitty Corp Meow Mix Forums

## Help & Tutorials => Help => Topic started by: tjmsrubegoldberg on July 30, 2010, 12:38:09 AM

Copy and paste it into notepad and save as "ocarina.xml"As for cBliss if you follow the instructions, things will run smoothly. I don't use cBliss so I can't help you with that Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: SuperMii3D on August 31, 2013, 02:31:17 PM Oh, ok. So where do I put the "ocarina.xml? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: BabyLuigiOnFire on August 31, 2013, 02:33:24 PM You put all xmls in the riivolution folder Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: SuperMii3D on August 31, 2013, 02:37:54 PM Ok, cool. So now what? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: BabyLuigiOnFire on August 31, 2013, 02:41:22 PM Make a folder called "codes" and put your .gct files in there. It's just like gecko. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: SuperMii3D on August 31, 2013, 02:46:07 PM Ok, got it.Post Merge: August 31, 2013, 11:35:39 PMSo far, I got nothing.... Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: BabyLuigiOnFire on September 01, 2013, 11:38:16 AM You even enabled them on riivolution? And changing hooks? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: SuperMii3D on September 01, 2013, 12:07:09 PM I dont have the hooks Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Vaild Address on September 03, 2013, 05:09:11 PM I know I asked for this already but, does anyone know the names of the THP movies?The names to them on smashboards is down for some reason...Never mind, found it.http://allisbrawl.com/forum/topic.aspx?id=156562 (http://allisbrawl.com/forum/topic.aspx?id=156562) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Jade_Rock on September 30, 2013, 04:19:09 PM Can someone help me with this?When I use Super Sawndz I can't use .wav files keeps saying I need snvcov.exe,when I got it the sound still didn't change. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Camptain0 on October 25, 2013, 01:34:47 AM (Forgive me in advance for any stupidity in this question) Hello, I'd just like to ask a question. I apologize if this has been answered before on this thread, but i personally don't feel like reading 40 pages of responses without even guaranteeing that my question has been asked. Now, I don't know if this was because of something I had done previously, but I can't remember if I have ever done something to cause this. Basically, I have a private folder, and a wii folder inside of that on my SD. but all I have after that is a folder called "TITLE" containing what I believe to be wiiware games (no RSBE though), and two files called "LOC.BAK" and another one called "LOC.DAT" I have everything else necessary in order to put them in the game, but I can't find those folders. Any help is greatly appreciated. -Camptain0EDIT: I should also mention that this is NOT the SD card I installed the homebrew channel with, if that makes a difference. Plus, it is SDHC which i have a feeling might be the problem. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ɴᴇᴢʜᴀ on October 25, 2013, 04:22:42 AM Quote from: Camptain0 on October 25, 2013, 01:34:47 AM(Forgive me in advance for any stupidity in this question) Hello, I'd just like to ask a question. I apologize if this has been answered before on this thread, but i personally don't feel like reading 40 pages of responses without even guaranteeing that my question has been asked. Now, I don't know if this was because of something I had done previously, but I can't remember if I have ever done something to cause this. Basically, I have a private folder, and a wii folder inside of that on my SD. but all I have after that is a folder called "TITLE" containing what I believe to be wiiware games (no RSBE though), and two files called "LOC.BAK" and another one called "LOC.DAT" I have everything else necessary in order to put them in the game, but I can't find those folders. Any help is greatly appreciated. -Camptain0EDIT: I should also mention that this is NOT the SD card I installed the homebrew channel with, if that makes a difference. Plus, it is SDHC which i have a feeling might be the problem.Let me help you with that...If you are saying that the only content of your sd is wiiware games and can't find the brawl data, save a backup of that sd card data to your computer, format the sd and then pass the brawl mod data to the sd.About the note you mentioned...The sd doesn't need to be the same one you installed homebrew with.SDHC may be fine, however... make sure your sd is 2 gigs. (unless you are using riivolution, witch is out of my area) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Camptain0 on October 25, 2013, 06:54:30 AM Quote from: Scout on October 25, 2013, 04:22:42 AMLet me help you with that...If you are saying that the only content of your sd is wiiware games and can't find the brawl data, save a backup of that sd card data to your computer, format the sd and then pass the brawl mod data to the sd.About the note you mentioned...The sd doesn't need to be the same one you installed homebrew with.SDHC may be fine, however... make sure your sd is 2 gigs. (unless you are using riivolution, witch is out of my area)My SD card is 8 gigs, maybe that's the problem? I might have a 2gb non-sdhc card somewhere, so I might try that. Also what exactly do you mean by, "Pass the brawl mod data"? Sorry for being newbish xD Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ɴᴇᴢʜᴀ on October 25, 2013, 09:42:37 AM Quote from: Camptain0 on October 25, 2013, 06:54:30 AMMy SD card is 8 gigs, maybe that's the problem? I might have a 2gb non-sdhc card somewhere, so I might try that. Also what exactly do you mean by, "Pass the brawl mod data"? Sorry for being newbish xDIf you are using gecko, the sd card limit is 2 gigs, more than that will not work.As for the second question, the brawl mod data is simply all the files you need for your modded brawl to work. For example, in the root of your sd card you have 2-3 folders, two of them are labeled codes and private... the last one contains rsbe with all the music, stages, characters,etc Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Camptain0 on October 25, 2013, 10:19:58 AM Quote from: Scout on October 25, 2013, 09:42:37 AMIf you are using gecko, the sd card limit is 2 gigs, more than that will not work.As for the second question, the brawl mod data is simply all the files you need for your modded brawl to work. For example, in the root of your sd card you have 2-3 folders, two of them are labeled codes and private... the last one contains rsbe with all the music, stages, characters,etcQuote from: Scout on October 25, 2013, 09:42:37 AMIf you are using gecko, the sd card limit is 2 gigs, more than that will not work.As for the second question, the brawl mod data is simply all the files you need for your modded brawl to work. For example, in the root of your sd card you have 2-3 folders, two of them are labeled codes and private... the last one contains rsbe with all the music, stages, characters,etcQuote from: Scout on October 25, 2013, 09:42:37 AMIf you are using gecko, the sd card limit is 2 gigs, more than that will not work.As for the second question, the brawl mod data is simply all the files you need for your modded brawl to work. For example, in the root of your sd card you have 2-3 folders, two of them are labeled codes and private... the last one contains rsbe with all the music, stages, characters,etcAlright, but my original problem was that I couldn't FIND the brawl mod data. There was no app folder. I have read from other sources to just take a screenshot with it and it should appear, but from what I saw I can't take snapshots with an SDHC card. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ɴᴇᴢʜᴀ on October 25, 2013, 04:57:44 PM Quote from: Camptain0 on October 25, 2013, 10:19:58 AMAlright, but my original problem was that I couldn't FIND the brawl mod data. There was no app folder. I have read from other sources to just take a screenshot with it and it should appear, but from what I saw I can't take snapshots with an SDHC card.So you are saying that your brawl mod data that you moved to the sd before just... disappeared? I've never faced that before....Also, If you are taking screen shots, brawl can't read any sd card higher than 2gigs (it doesn't have the capacity), so there's that.Sorry if I wasn't much help :/ Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Camptain0 on October 25, 2013, 06:36:19 PM Quote from: Scout on October 25, 2013, 04:57:44 PMSo you are saying that your brawl mod data that you moved to the sd before just... disappeared? I've never faced that before....Also, If you are taking screen shots, brawl can't read any sd card higher than 2gigs (it doesn't have the capacity), so there's that.Sorry if I wasn't much help :/You were a huge help! You may not have completely solved my problem, but I still learned a lot, and understand it a bit more. I could probably fix it on my own, or just find a 2gb non-SDHC SD card.EDIT: I found a regular 1 GB SD card to use, so im going to try that. I'll let you know how that goes.EDIT 2: Sooooo.... I set up the files for the Shadow, Wisp, and Silver PSA's using the Riivolution method. I was able to launch the game, but immediately the "make sure you have your wii strap on" appears very faded, and I assume the game crashed because I have to force shut off the wii by holding it for the 10 seconds. Here is what it looks like (approx. 5 secs after I click "launch" on riivolution): http://imgur.com/J8pIV3F,al6eSHW,ojFoTlK,wg7HO2p#2 (http://imgur.com/J8pIV3F,al6eSHW,ojFoTlK,wg7HO2p#2)Now, I think this is due to my utter stupidity in understanding tutorials (or something along those lines). Here are the files I put in their respective folders. Tell me if I'm missing something, need to add something, or if im completely missing the point.Wisp (Jigglypuff): http://imgur.com/J8pIV3F,al6eSHW,ojFoTlK,wg7HO2p#1 (http://imgur.com/J8pIV3F,al6eSHW,ojFoTlK,wg7HO2p#1)Silver (Diddy Kong): http://imgur.com/J8pIV3F,al6eSHW,ojFoTlK,wg7HO2p#0 (http://imgur.com/J8pIV3F,al6eSHW,ojFoTlK,wg7HO2p#0)Shadow (Sonic): http://imgur.com/J8pIV3F,al6eSHW,ojFoTlK,wg7HO2p#3 (http://imgur.com/J8pIV3F,al6eSHW,ojFoTlK,wg7HO2p#3)Here is what was contained in the files I downloaded.Wisp: Same as in the wisp image previous.Silver: Same as in the silver image previous.Shadow: (The lines show where that file leads)               Root of downloaded file: http://imgur.com/W0jhiNN,c84YlrN#1 (http://imgur.com/W0jhiNN,c84YlrN#1)               Where "sonic" and "portrite" lead: http://imgur.com/W0jhiNN,c84YlrN#0 (http://imgur.com/W0jhiNN,c84YlrN#0)So, tell me what I'm doing wrong here, please and thank you :). Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on October 26, 2013, 03:26:50 AM users with riivolution 1.05 cannot use it to launch brawl - the strap will freeze, please use 1.04 Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Camptain0 on October 26, 2013, 12:41:58 PM Quote from: Diddy Kong on October 26, 2013, 03:26:50 AMusers with riivolution 1.05 cannot use it to launch brawl - the strap will freeze, please use 1.04Alright, switched to 1.04 and it booted fine, but none of my PSAs are showing up. There are no changes I can see, so it leads me to believe I'm doing something wrong with the file placements. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on October 27, 2013, 09:54:38 PM Quote from: Camptain0 on October 26, 2013, 12:41:58 PMAlright, switched to 1.04 and it booted fine, but none of my PSAs are showing up. There are no changes I can see, so it leads me to believe I'm doing something wrong with the file placements.now download and extract this (http://www.mediafire.com/?8vj8809jx1nc8po) to the root of your SD Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: icangetbackup on November 27, 2013, 11:49:17 AM Pretty N00b question here - I cannot, for the life of me, find a common5.pac file anywhere.Halp meh ;-; Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ɴᴇᴢʜᴀ on November 27, 2013, 12:26:06 PM Quote from: icangetbackup on November 27, 2013, 11:49:17 AMPretty N00b question here - I cannot, for the life of me, find a common5.pac file anywhere.Halp meh ;-;In Gecko;SD\private\wii\app\RSBE\pf\systemhope this helped Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on November 27, 2013, 11:00:19 PM Quote from: icangetbackup on November 27, 2013, 11:49:17 AMPretty N00b question here - I cannot, for the life of me, find a common5.pac file anywhere.Halp meh ;-;looking for the fresh file?https://www.dropbox.com/sh/p01chjw1j1k4zuz/RmG4RGibBg/system/common5_en.pac (https://www.dropbox.com/sh/p01chjw1j1k4zuz/RmG4RGibBg/system/common5_en.pac)its on the resource section under one link that has every fresh file needed for modding Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Ragiroth on December 10, 2013, 08:01:01 PM I wanted to ask, I apologize if it's been covered in this topic already, but I have an unhacked Wii without Project M.  I was told on the Smashboards that I don't have to hack my Wii if I want to add in other hacked content.  But I was told on here (I made a topic about it), that the hacked in characters (such as Ridley and Shadow) may not work because the characters in Project M have already been so heavily edited.  I was able to get in different models (or costumes/colors) for a couple characters though.  Can it definitely not be done on an unhacked Wii with Project M? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on December 11, 2013, 09:01:16 PM Quote from: Ragiroth on December 10, 2013, 08:01:01 PMI wanted to ask, I apologize if it's been covered in this topic already, but I have an unhacked Wii without Project M.  I was told on the Smashboards that I don't have to hack my Wii if I want to add in other hacked content.  But I was told on here (I made a topic about it), that the hacked in characters (such as Ridley and Shadow) may not work because the characters in Project M have already been so heavily edited.  I was able to get in different models (or costumes/colors) for a couple characters though.  Can it definitely not be done on an unhacked Wii with Project M?hacking your wii doesnt add anything to using mods without homebrew heres what hacking is needed for:USB loader and piratingsystem memory backupusing emulators on the wiihacking is NOT needed for:Project MCustom Tracks World WIde/Custom Tracks GPgecko cheating in gamesGecko-based brawl moddingRiivolution-based BRawl moddingRiivolution-based any game moddingMii installerMii extractorinstalling riivolution counts as hacking the wii but doesnt modify itheres what your limitations are if you dont hack the wii:for game mods, you will NOT be able to use a USB flash drive or an SD card bigger than 2GB to load mods or project M off of (installing riivolution) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Ragiroth on December 11, 2013, 09:41:20 PM So basically I am actually able to download hacked newly made characters into Project M on an unhacked Wii?  Just so I have it right.  Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on December 12, 2013, 03:21:02 PM Quote from: Ragiroth on December 11, 2013, 09:41:20 PMSo basically I am actually able to download hacked newly made characters into Project M on an unhacked Wii?  Just so I have it right.  yes, however, you DO know, project M is a PACK, NOT a loader to get you started with using all these random things on the vault... right? we mod the game the same way... but minus all these heavy codes to make brawl play like melee, you can modify project M to death if you want to, ONLY if you intend to play offline ONLY Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Ragiroth on December 15, 2013, 01:34:25 AM Quote from: Diddy Kong on December 12, 2013, 03:21:02 PMyes, however, you DO know, project M is a PACK, NOT a loader to get you started with using all these random things on the vault... right? we mod the game the same way... but minus all these heavy codes to make brawl play like melee, you can modify project M to death if you want to, ONLY if you intend to play offline ONLYOh yeah I know that.  It's more of I just don't know how.  I got a couple skins/textures for the characters in there fine.  But my thing is trying to get fully made characters by hackers (Shadow, Ridley, etc.), music, and possibly stages in Project M.  That's my concern.  And I just don't wanna mess anything up.  Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on December 15, 2013, 07:11:34 PM Quote from: Ragiroth on December 15, 2013, 01:34:25 AMOh yeah I know that.  It's more of I just don't know how.  I got a couple skins/textures for the characters in there fine.  But my thing is trying to get fully made characters by hackers (Shadow, Ridley, etc.), music, and possibly stages in Project M.  That's my concern.  And I just don't wanna mess anything up.  project M inclludes a code that already loads mods, and just replacing the files for say mario  (pf->fighter->mario->fitmario0.pcs) and it will loadwhen you make a gct with brawlbox's code manager just paste the code into the thing(if you still are afraid, til i impliment noob mod einto brstm copier or ask someone in the kcmm chat to help you make that gct that will load mods)because project M is NOT compatable with custom content only custom content you can use in project M without breaking the game is:musictextures of characters already in project M (no vertex edits)text hacksvoice hacksyou CANNOT use the following custom content in project M:stage hacks (PAC AND REL)movesetsmodelsanimationTHP Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Jerg on December 30, 2013, 08:12:31 AM Does anybody have PAL game files? I need smashbros_sound.brsar and info.pac. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Kafei on January 05, 2014, 09:58:42 AM Hey guys is Hex Vertex Swapping still a viable method? I tried but it NEVER works for me, same error every time! Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on January 05, 2014, 10:16:35 PM Quote from: Kafei on January 05, 2014, 09:58:42 AMHey guys is Hex Vertex Swapping still a viable method? I tried but it NEVER works for me, same error every time!vertex editing is now done in brawlbox's model viewer by click and drag Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: SoapMan on January 17, 2014, 01:12:12 PM I was trying to use some of custom characters skins that I downloaded here on Project M 3.0 but when I tried to boot the game it said, "Error. Too Many Codes." I placed them in the projectm folder on my sd card which is probably what you're not supposed to do. Can I use custom skins on Project M and if so where should I put the files? Should a make a new pf folder? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Jade_Rock on January 17, 2014, 01:34:17 PM Some of them you can not sure how to tell.They go in projectm/pf/fighter/"charater folder name"/Fit"character"XXSo for Link:projectm/pf/fighter/link/fitlinkXXXX means costume id. 00,01,02 etc some characters have more than others like how wario has 12 and other have 6. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Kafei on January 21, 2014, 09:08:42 AM Quote from: Diddy Kong on January 05, 2014, 10:16:35 PMvertex editing is now done in brawlbox's model viewer by click and dragYeah that didn't help at all Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Vanish Mantle on January 23, 2014, 10:40:26 AM Hello everyone I actually had a bit of an issue with the BrawlEx CSS. I managed to get everything to load right and characters work however their slots on the character select screen show up as Mario rather their given cloned character. Other than that it has worked just fine. I am also playing on my Wii by the way. I can post a video/screen shot if needed, just wondering if anyone knows what might be causing this. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Jade_Rock on January 23, 2014, 01:41:07 PM Change the hooktype in gecko config to axnextframe Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Tecko on March 14, 2014, 09:44:14 PM where is the bone reference located in brawlbox. Can you show pics if possible? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on March 28, 2014, 10:52:31 AM Quote from: Jade_Rock on January 23, 2014, 01:41:07 PMChange the hooktype in gecko config to axnextframeIs it the same for Riivolution? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Jade_Rock on March 29, 2014, 11:01:15 AM BrawlEx doesn'twork on rivo. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on March 29, 2014, 12:58:21 PM Quote from: Jade_Rock on March 29, 2014, 11:01:15 AMBrawlEx doesn'twork on rivo.Oh whoops. I missed that part. If I'm using normal Brawl, but I'm having the same problem with the CSPs, do I still change the hook type to axnextframe? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Jade_Rock on April 02, 2014, 04:06:12 PM I think so,I haven't messed with csp's really though.You should to the BrawlEx thread in programming.There's some videos for help in there. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on April 02, 2014, 04:16:33 PM Quote from: Jade_Rock on April 02, 2014, 04:06:12 PMI think so,I haven't messed with csp's really though.You should to the BrawlEx thread in programming.There's some videos for help in there.Thanks. I'll check it out. And fyi, axnextframe didn't work.The CSP's aren't the only things not working though. Most stages and a lot of the characters will make my Wii freeze (Strap Loaders and BRSTM's work just fine, though...). I only get characters that have little to no freeze reports so I don't know what it could be. I thought maybe it could be that I'm using v4.3, but this forum said that that would only effect other Homebrew Applications. ... Does that mean that it would effect Gecko OS and Riivolution? Should I downgrade? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on April 02, 2014, 04:21:04 PM Quote from: ShadowX on April 02, 2014, 04:16:33 PMThanks. I'll check it out. And fyi, axnextframe didn't work.The CSP's aren't the only things not working though. Most stages and a lot of the characters will make my Wii freeze (Strap Loaders and BRSTM's work just fine, though...). I only get characters that have little to no freeze reports so I don't know what it could be. I thought maybe it could be that I'm using v4.3, but this forum said that that would only effect other Homebrew Applications. ... Does that mean that it would effect Gecko OS and Riivolution? Should I downgrade?you are failing to compress your texture import at import and you flood the wii's RAM and thats when it freezes, with CSPs, you have like around just under 2MB to be safe withand by failing to index them first and lazily plop stuff in, your one import floods over 2MB and makes the game use more RAM than the wii has, this is when it freezesAnswer: please save your images as indexed color PNG or use CMPR format (this is that RGB dropdown in brawlbox when you click replace, then open a file) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on April 02, 2014, 04:53:16 PM Quote from: Diddy Kong on April 02, 2014, 04:21:04 PMyou are failing to compress your texture import at import and you flood the wii's RAM and thats when it freezes, with CSPs, you have like around just under 2MB to be safe withand by failing to index them first and lazily plop stuff in, your one import floods over 2MB and makes the game use more RAM than the wii has, this is when it freezesAnswer: please save your images as indexed color PNG or use CMPR format (this is that RGB dropdown in brawlbox when you click replace, then open a file)when you say "index" do you mean the format? As in c18 or rgb5a3 or i8? I always save them in c18 format since that's what the original was formatted to. Is that ok? And how would I compress the file? Do you mean the common5.pac file? If so, it says that brawlbox auto compresses it every time I save.@Jade_RockCould you send me a link to the forum you're talking about? I looked and found a lot of them, so I don't know which one to choose. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on April 02, 2014, 05:56:34 PM Quote from: ShadowX on April 02, 2014, 04:53:16 PMwhen you say "index" do you mean the format? As in c18 or rgb5a3 or i8? I always save them in c18 format since that's what the original was formatted to. Is that ok? And how would I compress the file? Do you mean the common5.pac file? If so, it says that brawlbox auto compresses it every time I save.@Jade_RockCould you send me a link to the forum you're talking about? I looked and found a lot of them, so I don't know which one to choose.no,  format CMPR is the like CL btw, CMPR is SMALLER than CL8by 80%ishcompress, your PNG file can be up to 80% smallerthe following belie is what i mean (ONE ONE OR THE OTHER ONLY)(http://i.imgur.com/GGgJvgP.png)OR, NOT AND(smaller = BETTER) notice how the CL8 is 21 KB, but the CMPR one is only 10 KB?(http://i.imgur.com/ds2BBAa.png) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on April 02, 2014, 08:05:24 PM Quote from: Diddy Kong on April 02, 2014, 05:56:34 PMno,  format CMPR is the like CL btw, CMPR is SMALLER than CL8by 80%ishcompress, your PNG file can be up to 80% smallerthe following belie is what i mean (ONE ONE OR THE OTHER ONLY)([url]http://i.imgur.com/GGgJvgP.png[/url])OR, NOT AND(smaller = BETTER) notice how the CL8 is 21 KB, but the CMPR one is only 10 KB?([url]http://i.imgur.com/ds2BBAa.png[/url])Oh! Ok! I think I get it now. So correct me if I'm wrong: I can either put the CSP in Photoshop and set it to Index Color Mode or when putting it into the common5.pac file, I set the format to CMPR? Is that right? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on April 02, 2014, 09:14:20 PM Quote from: ShadowX on April 02, 2014, 08:05:24 PMOh! Ok! I think I get it now. So correct me if I'm wrong: I can either put the CSP in Photoshop and set it to Index Color Mode or when putting it into the common5.pac file, I set the format to CMPR? Is that right?yes Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on April 02, 2014, 09:42:31 PM Quote from: Diddy Kong on April 02, 2014, 09:14:20 PMyesAlright. So doing this should:a) stop the freezing permanently (unless it's a hack that I have that's freezing the game)?b) allow the CSP's to actually show up? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on April 02, 2014, 10:48:37 PM Quote from: ShadowX on April 02, 2014, 09:42:31 PMAlright. So doing this should:a) stop the freezing permanently (unless it's a hack that I have that's freezing the game)?b) allow the CSP's to actually show up?yup Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on April 02, 2014, 11:35:22 PM Quote from: Diddy Kong on April 02, 2014, 10:48:37 PMyupWow. And to think that that's all it took... Alright, I'll try it out within the next few days and report back if there's anymore problems. Thanks for all your help!Post Merge: April 04, 2014, 07:05:10 PMOk. So I tested it and here are my results:a) No CSP's showed up. At all.b) Characters kept freezing. Almost never in the same spot. (Usually right before or right as I choose the stage.)(I tested the characters on a non-hacked stage, just to be safe.) All the CSP's that I put in were formatted to CMPR.After almost 2 years of doing this and seeing very little results, it's getting very depressing. Yet, I won't quit. :\ Idk Help? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: TechMage299 on April 21, 2014, 08:53:25 PM if i use a .pac file from PM for a char in brawl minus, will it change their moveset? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Jade_Rock on April 24, 2014, 06:18:50 PM Yes don't try mixing mods. Title: The Complete N00B's Guide to Brawl Hacking: Using on Wii Post by: marshman95 on May 23, 2014, 01:08:35 PM Hello. I was wondering how to use BrawlEx on an actual wii system? Any comments would help. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Jade_Rock on May 23, 2014, 11:06:13 PM You should go to the BrawlEx thread for tutorials and help. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on May 24, 2014, 12:29:25 PM So with normal Brawl not having enough positive results, I decided to finally switch over to Project: M. Finally, everything works and nothing has crashed so far. But being new to P:M, I obviously have a few questions:1. Is there a reason why Squirtle, Ivysuar, and Charizard lack a Final Smash? Has it just not been coded yet or what?2. Is there a way to add a new character? Like, say I wanted to get Shadow into P:M, but I still wanted to keep all the original characters. Is there a way that I can have him without porting him over someone else?3. Like #2, is there a way to add new stages? (Personal opinion: I was greatly disappointed by the small number of stages that were put in.)Those are all the questions that I can think of for now, but I have no doubt that I'll be back sometime with more. Any help with the current ones though, would be greatly appreciated. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Snakezarr on June 02, 2014, 09:36:39 PM Hey, I'm new to this hacking thing after banging my head against a wall trying to get it to work, I've decided to ask for help. The problem I'm having is that I have gecko OS and homebrew installed but I have no idea how to get the codes to work and I dont have an apps file in my private so I cant acess any of the brawl folders and have no Idea how to. Please helpI've gotten codes working but there are still no files in the D:\private\wii\APP\RSBE Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on June 03, 2014, 01:11:48 PM Quote from: Snakezarr on June 02, 2014, 09:36:39 PMHey, I'm new to this hacking thing after banging my head against a wall trying to get it to work, I've decided to ask for help. The problem I'm having is that I have gecko OS and homebrew installed but I have no idea how to get the codes to work and I dont have an apps file in my private so I cant acess any of the brawl folders and have no Idea how to. Please helpI've gotten codes working but there are still no files in the D:\private\wii\APP\RSBEdid you know nintendo didnt plan on us modding their game,the game nor the code will generate stuff for you that you can make yourself by clicking "new folder" and typing "pf"additionally, the games not going to dump itself to your sd card to edit, you need to get these yourself or download them and  place them on your SD card as if an ordinary document Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Snakezarr on June 03, 2014, 07:44:46 PM Could you give me a link to download them, I know that the game won't dump itself into my SD card Its just that I've looked EVERYWHERE and no one gives information on how to aquire the fighter folder, all tutorials assume you have it. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 03, 2014, 08:31:02 PM Quote from: Snakezarr on June 03, 2014, 07:44:46 PMCould you give me a link to download them, I know that the game won't dump itself into my SD card Its just that I've looked EVERYWHERE and no one gives information on how to acquire the fighter folder, all tutorials assume you have it.There is no direct download link. To "acquire" the fighter folder, you click on "New Folder" on your computer. You then make the folder with the appropriate character's "game name" (which are stated on the first page of this forum), and place the file(s) associated with that character in it. The hacks are located right here on the Brawl Vault. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Snakezarr on June 03, 2014, 10:28:27 PM Thank you for clearing that up. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 03, 2014, 10:32:10 PM Quote from: Snakezarr on June 03, 2014, 10:28:27 PMThank you for clearing that up.Anytime. :) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on June 03, 2014, 10:49:00 PM Quote from: Snakezarr on June 03, 2014, 07:44:46 PMCould you give me a link to download them, I know that the game won't dump itself into my SD card Its just that I've looked EVERYWHERE and no one gives information on how to aquire the fighter folder, all tutorials assume you have it.on top of this website is a resources button, and go there and on the bottom is this link: https://drive.google.com/folderview?id=0B4vhNdf69qaSZ0N0MnBjOXFYMU0# (https://drive.google.com/folderview?id=0B4vhNdf69qaSZ0N0MnBjOXFYMU0#)the original files are only needed if you are CREATING modsthe folder itself is nothing special its just a folder and has no unique things about it that makes it any different from making a folder labeled "fighter" in the "pf" folderthe reason why all tutorials assume you have it is because there's no need to aquire a directory (path) from a disc or download(http://i.imgur.com/Ewa6DYo.png) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowCrosserX on June 07, 2014, 06:01:34 PM   Hello, I am having an issue when I try and load a custom character texture on Super Smash Bros Brawl, via both Gecko OS and Riivolution. I have a softmodded Wii, I even have the textures named correctly over which character skin I want it to cover over, I also have the custom textures in the path: private/wii/app/RSBE/pf/fighter/(Name Of Character). Yet, when I load it up, it freezes when I attempt to choose a character or select a stage. I did not try a custom stage yet and sometimes it only loads the original skins for some reason.  For example, I downloaded a character texture on BrawlVault, which was Karas Knight(Meta Knight Texture), then put it the the path mentioned above, I even renamed it. I also did not modify the skin either. Could the game be freezing because the texture is broken or maybe these textures are patched? I tried making a .gct code file via Code Manager using the file replacement code and put it in the "codes" folder on the root of the SD card. In addition, my SD card does not exceed the 2GB memory limit.   So the question is, why is this happening? Is my file corrupted, is it patched by Nintendo, or perhaps the texture itself is broken  in general? There could be many possibilities... All I know is that I followed multiple tutorials stating what to do in which I followed every single step. Could someone please assist me in this issue? Many thanks! :)   Additional Information:- Wii Menu Version: 4.3U (United States)- Wii Console State: Softmodded- Wii Console Softmodded via LetterBomb  Issues Encountered:- Wii freezes when selecting a stage or character by loading a custom texture from Gecko OS or Riivolution- When Wii console freezes it will not allow me to turn the power off unless I unplug the cord. Therefor rendering me to attempt the process all over again.  File Information:- The Karas Knight texture is a .pcs file.   ~ShadowCrosserX Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Archer(AkenoS3) on June 07, 2014, 06:17:06 PM Seems like you don't have a PAC file...Open your texture in brawlbox, save it as a .pair file, and you're done. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 12, 2014, 03:43:24 PM I've just recently switched to Project: M (because it works) and everything was going perfectly fine until a couple days ago when I was downloading hacks and downloaded the Shadow over Mr. Game & Watch hack. It was the only one that required me to use a code (something in which I have found I suck at writing...) and a .rel file. I did what I could with the code and placed the provided .rel file in the module folder. Then when I went to test it, it froze! Right at the strap loading screen!So thinking that it had to have been the Shadow over G&M hack, I immediately went back to my computer and took off the the .pac/.pcs, .rel files, and the code. Guess what? It still didn't work! Same exact spot.This is the only time when I have had Project: M not work. (Besides it freezing because of other characters, but I took care of those.) If anybody could enlighten me as to why it's not working, I would be most appreciative. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Archer(AkenoS3) on June 12, 2014, 04:21:01 PM Quote from: ShadowX on June 12, 2014, 03:43:24 PMI've just recently switched to Project: M (because it works) and everything was going perfectly fine until a couple days ago when I was downloading hacks and downloaded the Shadow over Mr. Game & Watch hack. It was the only one that required me to use a code (something in which I have found I suck at writing...) and a .rel file. I did what I could with the code and placed the provided .rel file in the module folder. Then when I went to test it, it froze! Right at the strap loading screen!So thinking that it had to have been the Shadow over G&M hack, I immediately went back to my computer and took off the the .pac/.pcs, .rel files, and the code. Guess what? It still didn't work! Same exact spot.This is the only time when I have had Project: M not work. (Besides it freezing because of other characters, but I took care of those.) If anybody could enlighten me as to why it's not working, I would be most appreciative.SD Card issues? Did you try to format it? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 12, 2014, 04:26:05 PM Quote from: AkenoS3 on June 12, 2014, 04:21:01 PMSD Card issues? Did you try to format it?I'll try that, but that wouldn't explain why it worked before I put that particular hack on it.Post Merge: June 12, 2014, 05:03:10 PMNothing. Same exact result.Post Merge: June 12, 2014, 06:23:21 PMOk, so I formatted the SD and put on Project: M without any other extra mods, and then it worked. So it's not a card error. So my question now is, does anybody know if P:M supports adding extra SFX, Music, or Items? I'm using the Non-Homebrew version because I had to delete HB off my Wii. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Archer(AkenoS3) on June 12, 2014, 06:43:30 PM Quote from: ShadowX on June 12, 2014, 04:26:05 PMI'll try that, but that wouldn't explain why it worked before I put that particular hack on it.Post Merge: June 12, 2014, 05:03:10 PMNothing. Same exact result.Post Merge: June 12, 2014, 06:23:21 PMOk, so I formatted the SD and put on Project: M without any other extra mods, and then it worked. So it's not a card error. So my question now is, does anybody know if P:M supports adding extra SFX, Music, or Items? I'm using the Non-Homebrew version because I had to delete HB off my Wii.I dunno.Though it should work, because I recall adding some PSAs made by Amarythe and Kitsu, I deleted all their songs to add mine, and I even added some other SFX so... yea... Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 12, 2014, 06:56:58 PM Quote from: AkenoS3 on June 12, 2014, 06:43:30 PMI dunno.Though it should work, because I recall adding some PSAs made by Amarythe and Kitsu, I deleted all their songs to add mine, and I even added some other SFX so... yea...I think it might be items, since some hacks that are made for P:M or work for it, come with SFX. Plus, adding in your own music is about the easiest thing to do in Brawl hacking, I don't think that it should be a problem in Project: M.Oh well. I'm going to go try my theory. Thanks for all your help! (I might be back...)Post Merge: June 12, 2014, 10:56:50 PMOk, so SFX and custom music works fine! I haven't tested items yet. I'll probably do that tomorrow.Question: Besides using Sawndz (which is currently giving me problems), is there a way to change the victory themes and/or announcer calls? Could it be as simple as dropping in the corresponding .brsar file into the "sounds" folder and renaming it accordingly? Like if I wanted to replace Snake's victory theme, I would put in the .brsar file and name it Z46? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowCrosserX on June 14, 2014, 05:42:27 PM Update: In case your wondering what happened to my earlier post related to my model being deformed, I've deleted that post in which was located here and moved it to a more proper spot known as the "Model Help" section. I probably won't be very specific on where it's at, because being banned for promoting threads is one of the last things on my mind. Sorry... Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 20, 2014, 01:06:03 PM How do you get recolors to work for a Mr. Game & Watch hack? Obviously CSP's work but when I put recolors in the gamewatch folder, they're all the same original color. There has to be a way since Nintendo did it. I'm just wondering if anybody here knows that way. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: vanhuynh16 on June 20, 2014, 02:00:18 PM Hello! Does anyone know where the locations are all the font files? Like not in the font folders, but in the pac files. I read in an old thread that in MiscData[9], MiscData[10] in common2.pac and common3.pac contain font_hira.brfnt, font_melee.brfnt and font_latin1.arc, font_latin12.arc respectively.common2.pac- MiscData[9] = font_hira.brfnt- MiscData[10] = font_melee.brfntcommon3.pac- MiscData[9] = font_latin1.arc- MiscData[10] = font_latin12.arcSo I cannot find font_watch.arc. Does anyone know where this is located at in the pac files? Thank you!Or can someone help me look for it also within the pac files? It should be 232 KB! I would be very very thankful if you can help me find it! Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on June 20, 2014, 10:56:56 PM Quote from: vanhuynh16 on June 20, 2014, 02:00:18 PMHello! Does anyone know where the locations are all the font files? Like not in the font folders, but in the pac files. I read in an old thread that in MiscData[9], MiscData[10] in common2.pac and common3.pac contain font_hira.brfnt, font_melee.brfnt and font_latin1.arc, font_latin12.arc respectively.common2.pac- MiscData[9] = font_hira.brfnt- MiscData[10] = font_melee.brfntcommon3.pac- MiscData[9] = font_latin1.arc- MiscData[10] = font_latin12.arcSo I cannot find font_watch.arc. Does anyone know where this is located at in the pac files? Thank you!Or can someone help me look for it also within the pac files? It should be 232 KB! I would be very very thankful if you can help me find it! BRFNT files ARE The fonts, these are ONLY Moddable for a specific characterset for MKW unless you know the exact size and grid of the TPL for brawl'sthe font for the text and stuff such as the character names and stage names thats a ttexture of text Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: vanhuynh16 on June 21, 2014, 02:07:25 PM Quote from: Diddy Kong on June 20, 2014, 10:56:56 PMBRFNT files ARE The fonts, these are ONLY Moddable for a specific characterset for MKW unless you know the exact size and grid of the TPL for brawl'sthe font for the text and stuff such as the character names and stage names thats a ttexture of textI know that, but just replacing the arc files and brfnt files in system/font doesn't actually change the files unless you can find them in the pac files also. I'm trying to replace the brfnt and arc files with the Korean brfnt and arc files because I'm trying to make a Korean version of PM. Because I'm messing with the .msbin files, I need the font files to be in Korean so they can actually read the Korean on the .msbin files. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 26, 2014, 08:48:04 AM Does any version of P:M (no homebrew, homebrew, or gecko) support the use of an SD card larger than 2 GB? I know on the website they said that it had to be equal to or less, but I thought I had heard something about being able to use a larger card. Does anybody know anything about that? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on June 27, 2014, 03:37:48 PM Quote from: ShadowX on June 26, 2014, 08:48:04 AMDoes any version of P:M (no homebrew, homebrew, or gecko) support the use of an SD card larger than 2 GB? I know on the website they said that it had to be equal to or less, but I thought I had heard something about being able to use a larger card. Does anybody know anything about that?hackless wii set is limited to 2 GB because the hackless set depends on brawl using an SD card unmodde to even load the launched and brawl does not support cards bigger than 2GB Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 27, 2014, 03:50:13 PM Quote from: Diddy Kong on June 27, 2014, 03:37:48 PMhackless wii set is limited to 2 GB because the hackless set depends on brawl using an SD card unmodde to even load the launched and brawl does not support cards bigger than 2GBSo if I were to use the version either for Gecko or Homebrew (When they say Homebrew, they mean Riivolution, right?), I could use a larger card? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on June 28, 2014, 12:22:53 PM Quote from: ShadowX on June 27, 2014, 03:50:13 PMSo if I were to use the version either for Gecko or Homebrew (When they say Homebrew, they mean Riivolution, right?), I could use a larger card?heres how hackless wii worksyou take the stage builder method of installing homebrew, but INSTEAD of having the homebrew installer as the thing to load, we put either gecko, projectM".exe", or riivolution, these are ALL hackless wii loadable homebrew applicationswhat dictates the app that hackless wii loads?the app's BOOT.ELF being at the root of your SD card when they say homebrew, they mean, the set WITHOUT the stage builder thing to load it (meaning you MUST have homebrew channel installed to load ANY (pm, gecko, riivolution)) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 28, 2014, 12:32:28 PM Quote from: Diddy Kong on June 28, 2014, 12:22:53 PMheres how hackless wii worksyou take the stage builder method of installing homebrew, but INSTEAD of having the homebrew installer as the thing to load, we put either gecko, projectM".exe", or riivolution, these are ALL hackless wii loadable homebrew applicationswhat dictates the app that hackless wii loads?the app's BOOT.ELF being at the root of your SD card when they say homebrew, they mean, the set WITHOUT the stage builder thing to load it (meaning you MUST have homebrew channel installed to load ANY (pm, gecko, riivolution))So if I downloaded the Homebrew or the Gecko version and used the Homebrew Channel, I would use Gecko or Riivolution and it wouldn't matter which one? They would both be considered the hacked way of loading P:M? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on June 28, 2014, 03:20:40 PM Quote from: ShadowX on June 28, 2014, 12:32:28 PMSo if I downloaded the Homebrew or the Gecko version and used the Homebrew Channel, I would use Gecko or Riivolution and it wouldn't matter which one? They would both be considered the hacked way of loading P:M?BOTH are hackedif you are looking for hackless, REPLACE the homebrew installer from a get homebrew on wii download  with the boot.elf of an appexampleget this: http://www.wiibrew.org/w/images/4/4e/Smashstack.zip (http://www.wiibrew.org/w/images/4/4e/Smashstack.zip)and then download ONE of the following to the ROOT of your SD card:riivolution: http://www.mediafire.com/download/3417fildtozvztc/boot.elf (http://www.mediafire.com/download/3417fildtozvztc/boot.elf)Gecko: http://www.mediafire.com/download/8vhzclfz50qjh4u/boot.elf (http://www.mediafire.com/download/8vhzclfz50qjh4u/boot.elf)DESPITE what looks like the same exact file, they are actually different, just LABELD the same because the stage builder thing will be looking for a file in a specific place with that specific name and load the code it happens to containyou MUST DELETE all your stage buiilder stages through the stage builder  including the SD ones, then exit out and go back to stage builder Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 28, 2014, 03:31:33 PM Quote from: Diddy Kong on June 28, 2014, 03:20:40 PMBOTH are hackedif you are looking for hackless, REPLACE the homebrew installer from a get homebrew on wii download  with the boot.elf of an appexampleget this: [url]http://www.wiibrew.org/w/images/4/4e/Smashstack.zip[/url] ([url]http://www.wiibrew.org/w/images/4/4e/Smashstack.zip[/url])and then download ONE of the following to the ROOT of your SD card:riivolution: [url]http://www.mediafire.com/download/3417fildtozvztc/boot.elf[/url] ([url]http://www.mediafire.com/download/3417fildtozvztc/boot.elf[/url])Gecko: [url]http://www.mediafire.com/download/8vhzclfz50qjh4u/boot.elf[/url] ([url]http://www.mediafire.com/download/8vhzclfz50qjh4u/boot.elf[/url])DESPITE what looks like the same exact file, they are actually different, just LABELD the same because the stage builder thing will be looking for a file in a specific place with that specific name and load the code it happens to containyou MUST DELETE all your stage buiilder stages through the stage builder  including the SD ones, then exit out and go back to stage builderI already had all of this installed on my Wii originally. I had to take off Homebrew and thus Gecko because of a situation with a sibling of mine, but I still have Riivolution installed.My question is, is there a way for me to use P:M through Riivolution and use an SD card that's larger than 2 GB? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on June 28, 2014, 05:21:39 PM Quote from: ShadowX on June 28, 2014, 03:31:33 PMI already had all of this installed on my Wii originally. I had to take off Homebrew and thus Gecko because of a situation with a sibling of mine, but I still have Riivolution installed.My question is, is there a way for me to use P:M through Riivolution and use an SD card that's larger than 2 GB?if your sibling  doesnt allow you homebrew  then you're screwed and cant play projectM,  you CANNOT use riivo with PM, because they are cheat code happy for everything which bugs me personally that they use codes first, then files if the code cant mod what they needyou will NEED to iunstall homebrew on the wii  OR a 2GB sd card to run projectM from now on Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 28, 2014, 06:50:06 PM Quote from: Diddy Kong on June 28, 2014, 05:21:39 PMif your sibling  doesnt allow you homebrew  then you're screwed and cant play projectM,  you CANNOT use riivo with PM, because they are cheat code happy for everything which bugs me personally that they use codes first, then files if the code cant mod what they needyou will NEED to iunstall homebrew on the wii  OR a 2GB sd card to run projectM from now onSo Homebrew is mandatory for me to to use the other two options? Huh.So if I understand this correctly, to use P:M with a SD card larger than 2 gigs, I need to reinstall Homebrew and run it through what? Gecko OS? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on June 28, 2014, 07:30:40 PM Quote from: ShadowX on June 28, 2014, 06:50:06 PMSo Homebrew is mandatory for me to to use the other two options? Huh.So if I understand this correctly, to use P:M with a SD card larger than 2 gigs, I need to reinstall Homebrew and run it through what? Gecko OS?through their app Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 28, 2014, 07:37:58 PM Quote from: Diddy Kong on June 28, 2014, 07:30:40 PMthrough their appThat's the one that comes with the other two versions, right?So when I put one of the other versions on the SD card, I would go to the Homebrew Channel and then run P:M through the app that comes with it? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on June 28, 2014, 11:52:05 PM Quote from: ShadowX on June 28, 2014, 07:37:58 PMThat's the one that comes with the other two versions, right?So when I put one of the other versions on the SD card, I would go to the Homebrew Channel and then run P:M through the app that comes with it?its always been since 3.0 the app they madenow you take my previous postand MOVE the boot.elf of the projectM app to the root of the SD card Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on June 29, 2014, 12:30:44 AM Quote from: Diddy Kong on June 28, 2014, 11:52:05 PMits always been since 3.0 the app they madenow you take my previous postand MOVE the boot.elf of the projectM app to the root of the SD cardM'kay. I'll try it and see how it goes. Thanks for the help. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on July 12, 2014, 06:09:45 PM Project: M (in one way or another) is essentially part of, or uses, the Twilight Hack correct? According to http://www.wiibrew.org/wiki/SD/SDHC_Card_Compatibility_Tests (http://www.wiibrew.org/wiki/SD/SDHC_Card_Compatibility_Tests) a SD card thats 4gb or higher (SDHC) does not work with the Twilight Hack.If that's true, then how am I supposed to use an SD card that's larger than 2gb with P:M?Currently, I'm using a Transcend 8gb SDHC Class 10 card because my other 2 Transcend 2gb SD cards weren't enough. (I also have both 512mb and 256mb cards, but that's irrelevant right now.) All I did was copy the exact files from one 2gb card to the 8gb card. The 2gb cards worked fine, but as I said, didn't have enough memory. When I use my 8gb, it loads HBC and shows that I have P:M on the card and even loads the P:M menu. But when I press "PLAY", it just goes back to the Wii menu (also if I don't do anything for a while on the P:M menu, everything freezes except the background music).Can someone please help me out with this? I just spent almost $10 on this card so it's brand new and I don't want to have it be a waste of money. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ptoung on July 12, 2014, 08:52:02 PM are there any skins you can just load up from the character's folder with riivolution Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on July 13, 2014, 02:49:29 PM Quote from: ShadowX on July 12, 2014, 06:09:45 PMProject: M (in one way or another) is essentially part of, or uses, the Twilight Hack correct? According to [url]http://www.wiibrew.org/wiki/SD/SDHC_Card_Compatibility_Tests[/url] ([url]http://www.wiibrew.org/wiki/SD/SDHC_Card_Compatibility_Tests[/url]) a SD card thats 4gb or higher (SDHC) does not work with the Twilight Hack.If that's true, then how am I supposed to use an SD card that's larger than 2gb with P:M?Currently, I'm using a Transcend 8gb SDHC Class 10 card because my other 2 Transcend 2gb SD cards weren't enough. (I also have both 512mb and 256mb cards, but that's irrelevant right now.) All I did was copy the exact files from one 2gb card to the 8gb card. The 2gb cards worked fine, but as I said, didn't have enough memory. When I use my 8gb, it loads HBC and shows that I have P:M on the card and even loads the P:M menu. But when I press "PLAY", it just goes back to the Wii menu (also if I don't do anything for a while on the P:M menu, everything freezes except the background music).Can someone please help me out with this? I just spent almost$10 on this card so it's brand new and I don't want to have it be a waste of money.simple, its not the hackless set that works with larger SD cardsyou need to already have used the twilight hack to install either homebrew or the projectM launcher (BOTH of which support cards bigger than 2 GB)the gateway to starting hackless or installing them to your wii menu hackless does *NOT* support larger than 2 GBadditionally if its something like riivo, you can have a clone of the app  part of the two sd cards, and the bigger one have the mod pack installed on it, and just as the app booots, switch the two sd cards before the app gets a chance to read it Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on July 13, 2014, 06:30:30 PM Quote from: Diddy Kong on July 13, 2014, 02:49:29 PMsimple, its not the hackless set that works with larger SD cardsyou need to already have used the twilight hack to install either homebrew or the projectM launcher (BOTH of which support cards bigger than 2 GB)the gateway to starting hackless or installing them to your wii menu hackless does *NOT* support larger than 2 GBadditionally if its something like riivo, you can have a clone of the app  part of the two sd cards, and the bigger one have the mod pack installed on it, and just as the app booots, switch the two sd cards before the app gets a chance to read itPer your previous suggestion of using the P:M app, that's what I'm using now. I would like to keep everything on one card, if possible.My 8gb is formatted to FAT32 which I have not used before with Brawl hacking; I've always used the FAT format and I've never had a problem with it. (Note that my 8gb will not allow me to format it to FAT, nor have I found a way for the Wii itself to format my card as a digital camera can.) I don't know if this is the problem, but other than the size of the card, the format, and the class, there's nothing different between my 8gb and my 2gb. Any suggestions? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on July 14, 2014, 03:53:40 PM Quote from: ShadowX on July 13, 2014, 06:30:30 PMPer your previous suggestion of using the P:M app, that's what I'm using now. I would like to keep everything on one card, if possible.My 8gb is formatted to FAT32 which I have not used before with Brawl hacking; I've always used the FAT format and I've never had a problem with it. (Note that my 8gb will not allow me to format it to FAT, nor have I found a way for the Wii itself to format my card as a digital camera can.) I don't know if this is the problem, but other than the size of the card, the format, and the class, there's nothing different between my 8gb and my 2gb. Any suggestions?fat32 has a higher copacity per file and size limit, FAT is i think 2GB capacity max, and fat32 is 32 GB, xfat is 256GBthat doesnt matter on formatting, you will still need the 2 GB to launch the modlauncher from stage builder, then SWITCH sd cards when the app comes up, if this fails, then you HAVE to install the app to the wii menu or install homebrew from the 2GB Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on July 14, 2014, 06:38:20 PM Quote from: Diddy Kong on July 14, 2014, 03:53:40 PMfat32 has a higher copacity per file and size limit, FAT is i think 2GB capacity max, and fat32 is 32 GB, xfat is 256GBthat doesnt matter on formatting, you will still need the 2 GB to launch the modlauncher from stage builder, then SWITCH sd cards when the app comes up, if this fails, then you HAVE to install the app to the wii menu or install homebrew from the 2GBI did install the app. I said that in my previous comment; first sentence.I know that you need a 2gb card to run it from the stage builder. I'm asking how can use a larger card with the app. You said it could be done, but it's not working. What am I doing wrong? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on July 15, 2014, 02:15:42 PM Quote from: ShadowX on July 14, 2014, 06:38:20 PMI did install the app. I said that in my previous comment; first sentence.I know that you need a 2gb card to run it from the stage builder. I'm asking how can use a larger card with the app. You said it could be done, but it's not working. What am I doing wrong?if SDHC isnt working with the project M launcher launching project Mask the PMBR for helpotherwise, look into the SDHC code and checking that the app used uses an SDHC supported IOS Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on July 15, 2014, 02:35:49 PM Quote from: Diddy Kong on July 15, 2014, 02:15:42 PMif SDHC isnt working with the project M launcher launching project Mask the PMBR for helpotherwise, look into the SDHC code and checking that the app used uses an SDHC supported IOSTwo things:1. Where do I contact the PMBR?2. How would I look into the SDHC code? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on July 16, 2014, 03:53:29 PM Quote from: ShadowX on July 15, 2014, 02:35:49 PMTwo things:1. Where do I contact the PMBR?2. How would I look into the SDHC code?1) click our chat link, then join #projectM room2) this forums Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on July 16, 2014, 07:12:53 PM Quote from: Diddy Kong on July 16, 2014, 03:53:29 PM1) click our chat link, then join #projectM room2) this forums1. Alright. I found it. I'll look into it. Thanks.2. I'm not sure I understand what you mean by "this forums". Do you mean that there's a page on the KC-MM forums that would indicate where I locate the SDHC code? If so, could you give me a link to that/those page(s)? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on July 17, 2014, 01:59:09 PM Quote from: ShadowX on July 16, 2014, 07:12:53 PM1. Alright. I found it. I'll look into it. Thanks.2. I'm not sure I understand what you mean by "this forums". Do you mean that there's a page on the KC-MM forums that would indicate where I locate the SDHC code? If so, could you give me a link to that/those page(s)?http://forums.kc-mm.com/index.php?topic=65342.0 (http://forums.kc-mm.com/index.php?topic=65342.0) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on July 17, 2014, 03:01:34 PM Quote from: Diddy Kong on July 17, 2014, 01:59:09 PM[url]http://forums.kc-mm.com/index.php?topic=65342.0[/url] ([url]http://forums.kc-mm.com/index.php?topic=65342.0[/url])Thanks! I'll look into it and see how things turn out. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: MrEpicIsHere777 on July 23, 2014, 11:31:11 AM I'm not sure if this is the right place to ask, (since I am new) but is thier have the common(x).pac files for NTSC-U brawl? The newest link is disabled. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on July 23, 2014, 11:41:30 AM Quote from: MrEpicIsHere777 on July 23, 2014, 11:31:11 AMI'm not sure if this is the right place to ask, (since I am new) but is thier have the common(x).pac files for NTSC-U brawl? The newest link is disabled.https://drive.google.com/folderview?id=0B4vhNdf69qaSVGlRMXNRWW1Ybms&tid=0B4vhNdf69qaSZ0N0MnBjOXFYMU0 (https://drive.google.com/folderview?id=0B4vhNdf69qaSVGlRMXNRWW1Ybms&tid=0B4vhNdf69qaSZ0N0MnBjOXFYMU0) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: MrEpicIsHere777 on July 23, 2014, 11:43:08 AM Quote from: ShadowX on July 23, 2014, 11:41:30 AMhttps://drive.google.com/folderview?id=0B4vhNdf69qaSVGlRMXNRWW1Ybms&tid=0B4vhNdf69qaSZ0N0MnBjOXFYMU0 (https://drive.google.com/folderview?id=0B4vhNdf69qaSVGlRMXNRWW1Ybms&tid=0B4vhNdf69qaSZ0N0MnBjOXFYMU0)Thanks so much! Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on July 23, 2014, 11:44:22 AM Quote from: MrEpicIsHere777 on July 23, 2014, 11:43:08 AMThanks so much!Anytime. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: spiderfreak1011 on July 25, 2014, 02:55:06 AM Ok, so i'm a Noob at Brawl Hacks(big surprise, :P), and i plan on doing a machinima in the future. Quick question though, i don't plan on getting a Wii, but i did hear that you could still do Brawl hacks and get Homebrew on a Wii U(well, to hack Wii games anyway). I'd like to know what are the main differences when it comes to the instructions in the Opening post if i decide to hack Brawl with a Wii U rather than a Wii? What would i have to do differently? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on July 25, 2014, 02:22:18 PM Quote from: spiderfreak1011 on July 25, 2014, 02:55:06 AMOk, so i'm a Noob at Brawl Hacks(big surprise, :P), and i plan on doing a machinima in the future. Quick question though, i don't plan on getting a Wii, but i did hear that you could still do Brawl hacks and get Homebrew on a Wii U(well, to hack Wii games anyway). I'd like to know what are the main differences when it comes to the instructions in the Opening post if i decide to hack Brawl with a Wii U rather than a Wii? What would i have to do differently?same as hacking the wii before the gameless hacks came out2GB SD maxmust have brawl discmust use the stage builder thing (same [censored] project M launches through) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Rai909 on July 27, 2014, 04:38:54 PM Can anyone help me get the .pac/.pcs info for the characters the link to it has been disabled and I don't know where else I could get it from. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ptoung on July 27, 2014, 06:25:38 PM hey,I have a mac o code maneger and file patch code aren't working,iS THERE ANYONE I CAN HIRE TO HELP ME I WILL PAY YOU FOR IT Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on July 27, 2014, 06:38:38 PM Quote from: Rai909 on July 27, 2014, 04:38:54 PMCan anyone help me get the .pac/.pcs info for the characters the link to it has been disabled and I don't know where else I could get it from.https://drive.google.com/folderview?id=0B4vhNdf69qaSZ0N0MnBjOXFYMU0# (https://drive.google.com/folderview?id=0B4vhNdf69qaSZ0N0MnBjOXFYMU0#) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on July 28, 2014, 03:43:52 AM Quote from: ptoung on July 27, 2014, 06:25:38 PMhey,I have a mac o code maneger and file patch code aren't working,iS THERE ANYONE I CAN HIRE TO HELP ME I WILL PAY YOU FOR ITno need to pay people now, the code manager doesn't work on a mac, and for the file patch code, as per standard proceedure. I ask to verify a few things:your SD card, is it a 2 GB or smaller? (without further tinkering with the wii, you cant use a larger SD card and be able to load mods (or codes))have you installed your mods (if any) in their proper place?stages for example should beprivate/wii/app/RSBE/pf/stage/melee/STGFINAL.pacfor fightersprivate/wii/app/RSBE/pf/fighter/diddy/fitdiddy00.pcsfor musicprivate/wii/app/RSBE/pf/sound/strm/x24.brstm Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: spiderfreak1011 on July 31, 2014, 03:36:53 AM Quote from: Diddy Kong on July 25, 2014, 02:22:18 PMsame as hacking the wii before the gameless hacks came out2GB SD maxmust have brawl discmust use the stage builder thing (same [censored] project M launches through)Got it, thanks for letting me know! I have one more question though, if you don't mind. I've heard that you need LOZ Twilight Princess in order to set up Homebrew, is this true? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Bazookaturtle on July 31, 2014, 10:42:59 AM Ok, so everything seems like it would be working except that your brawl XML for rivolution is just a bunch of stuff, and not a file. I can't put it into my SD card!Post Merge: July 31, 2014, 10:46:47 AMQuote from: ptoung on July 27, 2014, 06:25:38 PMhey,I have a mac o code maneger and file patch code aren't working,iS THERE ANYONE I CAN HIRE TO HELP ME I WILL PAY YOU FOR ITAt this point, I would do the same. I've been working on one texture hack for about a month now, barely knowing what I'm doing. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on July 31, 2014, 12:55:53 PM Quote from: spiderfreak1011 on July 31, 2014, 03:36:53 AMGot it, thanks for letting me know! I have one more question though, if you don't mind. I've heard that you need LOZ Twilight Princess in order to set up Homebrew, is this true? the brawl disc is easier, TP needs a speial infected save file on the wii system memory, brawl, you just go with the exploit and go to stage builderQuote from: Bazookaturtle on July 31, 2014, 10:42:59 AMOk, so everything seems like it would be working except that your brawl XML for rivolution is just a bunch of stuff, and not a file. I can't put it into my SD card!Post Merge: July 31, 2014, 10:46:47 AMAt this point, I would do the same. I've been working on one texture hack for about a month now, barely knowing what I'm doing.https://www.dropbox.com/s/z6us659reuxco4p/BeyondRiivolution.xml (https://www.dropbox.com/s/z6us659reuxco4p/BeyondRiivolution.xml)select download and use the gecko diretory setup for this config Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on July 31, 2014, 09:47:15 PM I'm a 3D modeler, but I'm not too good with rigging, vertex hacking, etc. when it comes to Brawl hacks. (The most I've ever done is make recolors for previously made and textured models.) My question is, is there a place on these forums (or elsewhere) where I can post links to models that I've made (or collected. I would, of course, give credit to the original creator.) so that others who are more experienced can rig them so they can be usable in Brawl? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: spiderfreak1011 on August 01, 2014, 04:03:42 AM Quote from: Diddy Kong on July 31, 2014, 12:55:53 PMthe brawl disc is easier, TP needs a speial infected save file on the wii system memory, brawl, you just go with the exploit and go to stage builderhttps://www.dropbox.com/s/z6us659reuxco4p/BeyondRiivolution.xml (https://www.dropbox.com/s/z6us659reuxco4p/BeyondRiivolution.xml)select download and use the gecko diretory setup for this configGot it thanks, cause i'm only interested in Brawl hacking. :) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ptoung on August 06, 2014, 12:00:33 PM DOES ANYONE HERE KNOW ANYONE I CAN HIRE TO HELP ME WITH THIS Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on August 06, 2014, 12:06:13 PM You don't have to hire anybody. If you need help, just ask. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on August 06, 2014, 12:41:50 PM Quote from: ptoung on August 06, 2014, 12:00:33 PMDOES ANYONE HERE KNOW ANYONE I CAN HIRE TO HELP ME WITH THISQuote from: Diddy Kong on July 28, 2014, 03:43:52 AMno need to pay people now, the code manager doesn't work on a mac, and for the file patch code, as per standard proceedure. I ask to verify a few things:your SD card, is it a 2 GB or smaller? (without further tinkering with the wii, you cant use a larger SD card and be able to load mods (or codes))have you installed your mods (if any) in their proper place?stages for example should beprivate/wii/app/RSBE/pf/stage/melee/STGFINAL.pacfor fightersprivate/wii/app/RSBE/pf/fighter/diddy/fitdiddy00.pcsfor musicprivate/wii/app/RSBE/pf/sound/strm/x24.brstmdid you NOT read above?that was some help posts in figuring out your problem and the solution to it Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: mezoya on August 06, 2014, 02:52:52 PM I just downloaded Pikezer's hack, and I can't seem to get it to work. I even reformatted my SD card and reinstalled Homebrew Channel, along with deleting my old SSBB save in case it may have been corrupt. I tried running it through Gecko, and it just gives me All the normal characters you start the game with, and the stage select screen has a bunch of copied Hannebro(Or however it's spelt) and Pokemon Stadium 2's. Anyone know what my problem is? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ptoung on August 06, 2014, 02:59:40 PM Quote from: Diddy Kong on August 06, 2014, 12:41:50 PMdid you NOT read above?that was some help posts in figuring out your problem and the solution to ityes I put the hacks in wii/app/RSBE/pf/fighter/then the fighter codename loaded up both riivlution and gecko os and it didn't work Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on August 06, 2014, 04:20:54 PM Quote from: mezoya on August 06, 2014, 02:52:52 PMI just downloaded Pikezer's hack, and I can't seem to get it to work. I even reformatted my SD card and reinstalled Homebrew Channel, along with deleting my old SSBB save in case it may have been corrupt. I tried running it through Gecko, and it just gives me All the normal characters you start the game with, and the stage select screen has a bunch of copied Hannebro(Or however it's spelt) and Pokemon Stadium 2's. Anyone know what my problem is?you may have some bad GCT in geckotry this one https://www.dropbox.com/s/l1tqgefs873139a/rsbe01.gct (https://www.dropbox.com/s/l1tqgefs873139a/rsbe01.gct)in any case, it may be a good idea to contact the uploader of the hack and ask what the full setup needs to look like, There are also region specific things which either dont work, break, or act weird when used in other regionslike a PAL announcer call wont work on american and vice versa Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: mezoya on August 06, 2014, 04:40:18 PM Quote from: Diddy Kong on August 06, 2014, 04:20:54 PMyou may have some bad GCT in geckotry this one https://www.dropbox.com/s/l1tqgefs873139a/rsbe01.gct (https://www.dropbox.com/s/l1tqgefs873139a/rsbe01.gct)in any case, it may be a good idea to contact the uploader of the hack and ask what the full setup needs to look like, There are also region specific things which either dont work, break, or act weird when used in other regionslike a PAL announcer call wont work on american and vice versaOkay, I'll definitely give this a try, and Contact him. Thanks! You're the best man!Post Merge: August 06, 2014, 04:59:36 PMThat GCT fixed the stage select, made it the games Vanilla again. I'll try and get ahold of Pikezer for sure. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ptoung on August 06, 2014, 05:39:46 PM I have a mac so Gct files don't work and even when I use the right file my wii doesn't sense it Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on August 07, 2014, 12:55:10 PM Quote from: ptoung on August 06, 2014, 05:39:46 PMI have a mac so Gct files don't work and even when I use the right file my wii doesn't sense itplease make sure the files are in the right placeGCT in -> codesthe mod should also be in the right spotexample -> private -> wii -> app -> RSBE -> pf -> fighter -> diddy -> fitdiddy00.pcsthe wii is expecting the files to be in very specific folders with very specific names or it "won't notice it" Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Goko567 on August 08, 2014, 07:30:37 AM Um does this work the same for usb loader gx? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Axtran on September 07, 2014, 02:24:40 PM it actually is possible to use sfx hacks with gecko. there is a soundank replacement code. i know its a bit late to post this, and somebody probably beat me to it, but this is the code needed to do sfx hacksReplacement SoundBank Engine v1.20 [InternetExplorer, Dantarion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itle: Re: The Complete N00B's Guide to Brawl Hacking Post by: Fr0st3h on October 26, 2014, 03:04:23 PM alright crap had to format my sd card for some reason. now i set it up just the way it was before and when i start brawl through gecko it wont work.basically after a while of using textures and psas i got tired of always checking if single things worked now when i got the last mod out of about 5 without testing and it required code manager i put the codes in a seperate .gct from the RSBP01 file put the texture and moveset in as normal but it then stopped working. so yeah unable to play modded. any idea whats going on? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: SubZero2 on December 22, 2014, 03:53:12 PM Whats the SFX id? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on December 23, 2014, 03:05:39 AM Quote from: Projectbrawl7 on December 22, 2014, 03:53:12 PMWhats the SFX id?for who? sfx ID is either a hexadecimal number of a sawnd intstallation or targetor  a decimal number to name a sawnd file in the gecko modlauncher (BRSTM copier can identify this for you) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: 1blitzer1 on January 04, 2015, 08:58:54 AM Complete noob question: does rsb(x) mean rsbe? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: 1blitzer1 on January 06, 2015, 10:34:16 PM Quote from: Diddy Kong on August 06, 2014, 04:20:54 PMyou may have some bad GCT in geckotry this one https://www.dropbox.com/s/l1tqgefs873139a/rsbe01.gct (https://www.dropbox.com/s/l1tqgefs873139a/rsbe01.gct)in any case, it may be a good idea to contact the uploader of the hack and ask what the full setup needs to look like, There are also region specific things which either dont work, break, or act weird when used in other regionslike a PAL announcer call wont work on american and vice versaHey, do you think you could remake that link and add an unrestricted camera hack? Your code seems to be the only one that seems to work for my Wii :) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on January 09, 2015, 12:28:39 PM Quote from: 1blitzer1 on January 04, 2015, 08:58:54 AMComplete noob question: does rsb(x) mean rsbe?RSB?what they mean, is instead of them listing every combination that last letter can be, they just put X (like in algebra math)X = either E, P, or JsoRSBE, RSBJ, or RSBPif you are using american brawl, its RSBE, if japanese, RSBJ, if european version, RSBP Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: brandonfcv on January 29, 2015, 08:26:46 PM Noob question. If I'm currently using Nebulon's brawl for all brawlex package (found here http://forums.kc-mm.com/index.php?topic=71453.0 (http://forums.kc-mm.com/index.php?topic=71453.0)) and I want to add in a character (yoda) from another package that I found. How would I do that? Title: Does this work with vWii? Post by: GamerX102 on April 15, 2015, 04:12:45 PM So I was following this on my vWii (Wii version on WiiU) and I ran into a problem.  In my private folder (old and new) there is nothing for the brawl characters. I was hoping you would know about how to work around this or if there is anything I could do. When I tried, I couldn't even save a custom stage to the SD card. If anybody knows about this, please do help Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on April 16, 2015, 01:02:02 PM Quote from: GamerX102 on April 15, 2015, 04:12:45 PMSo I was following this on my vWii (Wii version on WiiU) and I ran into a problem.  In my private folder (old and new) there is nothing for the brawl characters. I was hoping you would know about how to work around this or if there is anything I could do. When I tried, I couldn't even save a custom stage to the SD card. If anybody knows about this, please do helpthe game doesn't make folders it doesn't need, the game (without hacking) only needs the AL RP and ST foldersmods use a user-created ddirectory, you need to create the PF/fighter/xxx folders yourself on the computer (right click -> new -> folder) also, unless you are using riivolution from homebrew or already installed on the wiiU, you cannot use an SD card larger than 2 GB or brawl will say the device in the slot cannot be used Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: GamerX102 on April 17, 2015, 08:05:37 PM Quote from: Diddy Kong on April 16, 2015, 01:02:02 PMthe game doesn't make folders it doesn't need, the game (without hacking) only needs the AL RP and ST foldersmods use a user-created ddirectory, you need to create the PF/fighter/xxx folders yourself on the computer (right click -> new -> folder) also, unless you are using riivolution from homebrew or already installed on the wiiU, you cannot use an SD card larger than 2 GB or brawl will say the device in the slot cannot be usedAs I tried this (creating the folders myself) I set the Riivolution to replace default files and put a texture called cosmicyoshi.pcs into a folder I created called yoshi. It didn't work, and I was wondering if you could help again. Sorry for any troubles Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: oocarlos on April 22, 2015, 09:44:14 AM I made a sword in blender and I'm trying to put it over toon links Master Sword how would one do that or replace the sword in general Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on April 24, 2015, 06:29:23 PM Quote from: GamerX102 on April 17, 2015, 08:05:37 PMAs I tried this (creating the folders myself) I set the Riivolution to replace default files and put a texture called cosmicyoshi.pcs into a folder I created called yoshi. It didn't work, and I was wondering if you could help again. Sorry for any troubleschange cosmicyoshi.pcs to be named fityoshi00.pcs and try again Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: GamerX102 on April 26, 2015, 04:50:00 PM Quote from: Diddy Kong on April 24, 2015, 06:29:23 PMchange cosmicyoshi.pcs to be named fityoshi00.pcs and try againWhen I tried this, it didn't work. Might there be any other problems? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 02, 2015, 11:42:11 AM Quote from: GamerX102 on April 26, 2015, 04:50:00 PMWhen I tried this, it didn't work. Might there be any other problems?remember, you need to have a way of applying mods, booting the game normally wont yield modson your 2GB or LESS SD cardprivate->wii->app->RSBE->pf->fighter->yoshi->fityoshi00.pcsalso, if you are using a european copy, its RSBP (in the codes AND for the folder)if you are japanese copy, its RSBJ (in the codes and folder) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: GamerX102 on May 03, 2015, 09:39:10 AM Quote from: Diddy Kong on May 02, 2015, 11:42:11 AMremember, you need to have a way of applying mods, booting the game normally wont yield modson your 2GB or LESS SD cardprivate->wii->app->RSBE->pf->fighter->yoshi->fityoshi00.pcsalso, if you are using a european copy, its RSBP (in the codes AND for the folder)if you are japanese copy, its RSBJ (in the codes and folder)I double checked the names, loaded from a 2GB sd card, and loaded from Riivolution. It still doesn't work. Should I give you a link to the file? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 03, 2015, 08:46:11 PM Quote from: GamerX102 on May 03, 2015, 09:39:10 AMI double checked the names, loaded from a 2GB sd card, and loaded from Riivolution. It still doesn't work. Should I give you a link to the file?snapshot your enture SD card, i have a feeling i know what's missing (http://www.mediafire.com/?8vj8809jx1nc8po) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: GamerX102 on May 04, 2015, 03:08:17 PM Quote from: Diddy Kong on May 03, 2015, 08:46:11 PMsnapshot your enture SD card, i have a feeling i know what's missing ([url]http://www.mediafire.com/?8vj8809jx1nc8po[/url])I downloaded and added the new .xml while deleting the old one and my WiiU crashed. Any options I need to change? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 05, 2015, 03:44:23 AM Quote from: GamerX102 on May 04, 2015, 03:08:17 PMI downloaded and added the new .xml while deleting the old one and my WiiU crashed. Any options I need to change?the one from the link in my last post should work reguardless, if you are using riivo version 1.05, please upgrade it to 1.06, check that your codes on the SD card do NOT have any file patch codes (to be safe, just delete your SD card cheat codes for brawl), or codes that may cause the game to freeze, brawl w/codes (turns on mods and codes), and GXDraw hook (recommended for brawl, another hook is used if you use the online patch code) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: GamerX102 on May 05, 2015, 06:34:22 PM To run this, do you need Gecko Cheat Manager? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 07, 2015, 02:54:11 PM Quote from: GamerX102 on May 05, 2015, 06:34:22 PMTo run this, do you need Gecko Cheat Manager?no Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: GamerX102 on May 07, 2015, 03:47:51 PM Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 08, 2015, 12:22:05 PM Quote from: GamerX102 on May 07, 2015, 03:47:51 PMIt crashedim guessing at the strap screen (weather or not you have a strap mod) this means you have 1.05 riivo (1.05 riivo does NOT work with brawl unless you use a console's built in gamecube port and do NOT connect a single wii remote [ original wii only, will crash no matter what on wii U]), update to 1.06if you have, and its freezing somewhere else, the mod is bad or you installed the mod wrong and/or forgot something (i do not recommend brawlex mods or slot ports to anyone just starting to get into mods or not experienced to the point they can make their own character mods from scratch) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: GamerX102 on May 08, 2015, 02:48:09 PM I do have 1.06, so I will try to use a different model and see if that works. I'll respond later with what happens.Post Merge: May 08, 2015, 02:59:28 PMTried a Yoshi skin called Polygon Yoshi and it crashed. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 09, 2015, 02:18:15 PM Quote from: GamerX102 on May 08, 2015, 02:48:09 PMI do have 1.06, so I will try to use a different model and see if that works. I'll respond later with what happens.Post Merge: May 08, 2015, 02:59:28 PMTried a Yoshi skin called Polygon Yoshi and it crashed.link the hack please also try a mod from my profile (none should crash), ill look into the mod, and if mine crashes, you have some incompatability loaded Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: GamerX102 on May 09, 2015, 06:32:28 PM http://forums.kc-mm.com/Gallery/BrawlView.php?MainType=Character&Target=Yoshi (http://forums.kc-mm.com/Gallery/BrawlView.php?MainType=Character&Target=Yoshi) Bottom part of 2nd pagePost Merge: May 09, 2015, 06:38:37 PMI used Carbon Fiber Yoshi (Your own hack) and it crashed. Is it possible that the .xml I'm using (The one you posted) is corrupted or can't be used on the WiiU Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 10, 2015, 02:37:53 AM Quote from: GamerX102 on May 09, 2015, 06:32:28 PM[url]http://forums.kc-mm.com/Gallery/BrawlView.php?MainType=Character&Target=Yoshi[/url] ([url]http://forums.kc-mm.com/Gallery/BrawlView.php?MainType=Character&Target=Yoshi[/url]) Bottom part of 2nd pagePost Merge: May 09, 2015, 06:38:37 PMI used Carbon Fiber Yoshi (Your own hack) and it crashed. Is it possible that the .xml I'm using (The one you posted) is corrupted or can't be used on the WiiUthe xml will never have any role in crashing, DELETE fityoshi.pac and fityoshimotionetc.pac from your sd card if you have those file(s), delete common5.pac and mu_menumain.pac from your SD card,the following files can crash if they are corrupt or bad (only accountign what you are testing and up to that point):strapen.pac, OPMovie.thp, sc_title, mu_menumain.pac, common5.pac, ft_yoshi.rel, fityoshi.pac, fityoshimotionetc.pac, fityoshixx.pac (all costume files in PAC form), info.pacif you can supply video of the game crashing starting from the riivolution boot all l the way up to the crash, i can detect why exactly it may be crashing Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: GamerX102 on May 10, 2015, 09:45:58 AM http://youtu.be/jWBTummUBE4 (http://youtu.be/jWBTummUBE4) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 10, 2015, 12:50:51 PM Quote from: GamerX102 on May 10, 2015, 09:45:58 AM[url]http://youtu.be/jWBTummUBE4[/url] ([url]http://youtu.be/jWBTummUBE4[/url])set video to unlisted - it wont let me see it Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: GamerX102 on May 10, 2015, 03:04:07 PM Try again Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Peachy11 on May 10, 2015, 05:52:39 PM I have all the right files, I have Homebrew, I have some textures- in the right place and I have Riivolution!I'll boot up Riivoloution- but the "File Code Replacements" option wont show up! Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: xYoungShadowx on May 11, 2015, 02:47:25 PM I was following the steps to Creating a mod from your"3. You will need Brawl's original files to base your hacks off of. All of the files except for the movies can be found here: http://www.mediafire.com/?sharekey=bf68243dc4c908b28d78a0e5552916095d6170349cac00195be6ba49b5870170. (http://www.mediafire.com/?sharekey=bf68243dc4c908b28d78a0e5552916095d6170349cac00195be6ba49b5870170.)"and when I clicked the link there was no folder found DX please help me? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 12, 2015, 03:22:16 AM Quote from: Peachy11 on May 10, 2015, 05:52:39 PMI have all the right files, I have Homebrew, I have some textures- in the right place and I have Riivolution!I'll boot up Riivoloution- but the "File Code Replacements" option wont show up!what riivo configuration are you using?Post Merge: May 12, 2015, 03:40:46 AMQuote from: xYoungShadowx on May 11, 2015, 02:47:25 PMI was following the steps to Creating a mod from your"3. You will need Brawl's original files to base your hacks off of. All of the files except for the movies can be found here: [url]http://www.mediafire.com/?sharekey=bf68243dc4c908b28d78a0e5552916095d6170349cac00195be6ba49b5870170.[/url] ([url]http://www.mediafire.com/?sharekey=bf68243dc4c908b28d78a0e5552916095d6170349cac00195be6ba49b5870170.[/url])"and when I clicked the link there was no folder found DX please help me?go to the resources page (link's at the top of this  page), its at the bottom, and should be a google drive link, everything got migrated to there Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Direact_N1 on May 12, 2015, 01:20:37 PM Can you do this on a emulator too? I just want to add hacks, not make them. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 13, 2015, 03:10:19 AM Quote from: Direact_N1 on May 12, 2015, 01:20:37 PMCan you do this on a emulator too? I just want to add hacks, not make them.dolphin - ISO inject required (rom hacking) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: pikachu385 on May 16, 2015, 07:45:57 AM Hi i am new here. Diddy i dowload many texture hacks here and i use wiiscrubber to mod, but i burn the image and in the wii crashs every time. I deleted the save from wii and wii brawl, but now is very bad. The game freezes in the middle of the battle. You can help me? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 16, 2015, 03:31:59 PM Quote from: pikachu385 on May 16, 2015, 07:45:57 AMHi i am new here. Diddy i dowload many texture hacks here and i use wiiscrubber to mod, but i burn the image and in the wii crashs every time. I deleted the save from wii and wii brawl, but now is very bad. The game freezes in the middle of the battle. You can help me? you either deleted important files from your ISO or have bad mods (or missing or not applying, codes needed to avoid the crash ( files MUST be named after their disc counterparts (eg: common5.pac MUST be named common5_en.pac) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: pikachu385 on May 17, 2015, 11:02:01 AM Quote from: Diddy Kong on May 16, 2015, 03:31:59 PMyou either deleted important files from your ISO or have bad mods (or missing or not applying, codes needed to avoid the crash ( files MUST be named after their disc counterparts (eg: common5.pac MUST be named common5_en.pac)Diddy, I replaced some Subspace of videos with a smaller video. And some characters actually had some codes, but do not know how to use them, I thought only served to who used the riievolution. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 17, 2015, 07:28:47 PM Quote from: pikachu385 on May 17, 2015, 11:02:01 AMDiddy, I replaced some Subspace of videos with a smaller video. And some characters actually had some codes, but do not know how to use them, I thought only served to who used the riievolution.if its codes like "ex has Wy's IC constant" ones, those are required or it will crash, riivolution only directly replaces files, it does not alter what's not present, with gecko, its got a code that directly alters sections in memory and replaces them with ones from the files on the SD card (the codes that stablize are still required when they are noted or supplied) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: pikachu385 on May 17, 2015, 07:50:27 PM The best solution for me is to download another iso and redo everything from scratch because I deleted everything and pc problem may be the songs that I replaced too? Because oddly enough, it works perfect in Dolphin, only on Wii giving problem. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on May 18, 2015, 12:00:41 PM This has probably already been asked, but where do hacks for the Results Screen (STGRESULT.pac) go? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: GamerX102 on May 18, 2015, 01:39:36 PM @Diddy Kong Did you see the video? I have it as unlisted. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on May 19, 2015, 06:45:35 PM Quote from: ShadowX on May 18, 2015, 12:00:41 PMThis has probably already been asked, but where do hacks for the Results Screen (STGRESULT.pac) go?should be the same place as other normal stages (pf/stage/melee)Post Merge: May 19, 2015, 06:51:35 PMQuote from: GamerX102 on May 10, 2015, 09:45:58 AM[url]http://youtu.be/jWBTummUBE4[/url] ([url]http://youtu.be/jWBTummUBE4[/url])a mod at the boot sequence or GCT code is either bad, or for the wrong region (main.dol mods are not compatable with brawl under riivo), its worth checking that you don't have a GCT loaded in the codes folder for brawl and that all strapen and sc_title files be removed from your SD card and test again, this is a first that I'm seeing the game fail to boot outside of riivo 1.05 or a main.dol mod Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on May 20, 2015, 02:25:05 PM Quote from: Diddy Kong on May 19, 2015, 06:45:35 PMshould be the same place as other normal stages (pf/stage/melee) Ok. That's what I thought. I'll test it out sometime and let you know if there's any problems. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: spiderfreak1011 on July 29, 2015, 11:49:52 PM Excuse me, i'd really appreciate it if someone could help me on this. I'm on Step 3: Downloading and Using Brawl Hacks. I've gotten the File Patch and Unrestricted Camera codes downloaded onto my SD Card via the Code Manager, but i'm a bit confused here. On Step 3, it gives me the names for the Characters and Stages. Does the guide want me to make mini sub sections in my SD card's Private folder for all of these things? Just curious if i've got the right idea on this.Also, another question, in Step 4, it gives me a Mediafire link for all of Brawl's Original Files, but when i try to look at those files, Mediafire says it's not my session and i can't access the files, even when i'm logged in and try to access those files. DOES ANYONE KNOW WHERE IS ANOTHER PLACE I COULD FIND THOSE FILES, PLEASE? : ( I'd really appreciate it if someone could help me with these two questions.One last question, since i'm using the Wii Mode on Wii U for Brawl hacking, do i need to worry about downgrading the Wii portion of my Wii U, or is that ok and not something that i have to worry about? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on July 30, 2015, 11:28:53 AM Quote from: spiderfreak1011 on July 29, 2015, 11:49:52 PMExcuse me, i'd really appreciate it if someone could help me on this. I'm on Step 3: Downloading and Using Brawl Hacks. I've gotten the File Patch and Unrestricted Camera codes downloaded onto my SD Card via the Code Manager, but i'm a bit confused here. On Step 3, it gives me the names for the Characters and Stages. Does the guide want me to make mini sub sections in my SD card's Private folder for all of these things? Just curious if i've got the right idea on this.Also, another question, in Step 4, it gives me a Mediafire link for all of Brawl's Original Files, but when i try to look at those files, Mediafire says it's not my session and i can't access the files, even when i'm logged in and try to access those files. DOES ANYONE KNOW WHERE IS ANOTHER PLACE I COULD FIND THOSE FILES, PLEASE? : ( I'd really appreciate it if someone could help me with these two questions.One last question, since i'm using the Wii Mode on Wii U for Brawl hacking, do i need to worry about downgrading the Wii portion of my Wii U, or is that ok and not something that i have to worry about?Codes go in "X:\codes\"You only have to create separate character and stage folders (named accordingly) if you're planning on modifying the corresponding character/stage.Here's the correct link for the original Brawl files: https://drive.google.com/folderview?id=0B4vhNdf69qaSZ0N0MnBjOXFYMU0# (https://drive.google.com/folderview?id=0B4vhNdf69qaSZ0N0MnBjOXFYMU0#)Concerning the Wii U question, I don't really know since that's not how i do it, but from what i've heard, you should just treat it like the latest Wii version (4.3). Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: spiderfreak1011 on August 13, 2015, 01:48:13 AM One more thing. Right now i'm using an SD card and i'm trying to use a Shulk PSA thats modded over Ike, but i have no idea where to put the files and which ones to put on my SD card. I downloaded the file for the PSA and looked at the files inside, but IDK where to go from here, and i don't want to try putting it in my SD card without knowing where it should go. Can someone help?Here's the hack in question BTW: http://forums.kc-mm.com/Gallery/BrawlView.php?Number=203267 (http://forums.kc-mm.com/Gallery/BrawlView.php?Number=203267) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on August 13, 2015, 09:55:49 AM Quote from: spiderfreak1011 on August 13, 2015, 01:48:13 AMOne more thing. Right now i'm using an SD card and i'm trying to use a Shulk PSA thats modded over Ike, but i have no idea where to put the files and which ones to put on my SD card. I downloaded the file for the PSA and looked at the files inside, but IDK where to go from here, and i don't want to try putting it in my SD card without knowing where it should go. Can someone help?Here's the hack in question BTW: [url]http://forums.kc-mm.com/Gallery/BrawlView.php?Number=203267[/url] ([url]http://forums.kc-mm.com/Gallery/BrawlView.php?Number=203267[/url])Everything in the "Fighter" folder goes into the "fighter" folder on your SD card. More specifically "X:/private/wii/app/RSBE/pf/fighter/ike/".The easiest way to install it would be to copy the "Ike" folder from the archive and paste it in the "fighter" folder on your SD card.There are also SFX that are included with this hack which may be needed to ensure it doesn't crash. (Some need it, some don't. idk It's not my area. I do mainly visuals.) Unless you're using Project: M, I'm not too sure on how to install them, but I would try it out without the SFX to see if it works anyways.If you're really desperate for the SFX, there's a ton of tutorials on here, YouTube, and Smashboards that take nothing more than a quick Google search.Everything else in the .zip are just visuals which are not required to make the hack work. But those are easy enough to install anyways.Hope that helps! Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: mire227 on August 26, 2015, 09:23:12 AM hello please i have dolphin and how to install this  hack to 8gb on sd card 2gb  ? please for that http://forums.kc-mm.com/index.php?topic=71453.msg1306822#msg1306822 (http://forums.kc-mm.com/index.php?topic=71453.msg1306822#msg1306822) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: DeathWish318 on October 15, 2015, 12:16:57 PM This has probably been a problem before and likely has solutions on here already, but I haven't come across it while reading through the posts on this thread (I'm only a few pages in.)I'm new to modding/hacks and I just want to add new characters and stages to play the game with some friends. I downloaded Nebulon's Smash 4 All mod following all the, limited, instructions provided. I figured out I needed to start it through the Homebrew channel though some trial and error, but when I went to select a character no new characters where present. Also, when I went to the select a stage area, the stages were all out of order and there were multiple versions of Hanenbow and Pokemon Stadium all over the place.Can anyone tell me what I did wrong and how to fix it or lead me to another post that will help? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Nobs4Lyf on October 22, 2015, 07:50:33 PM Um, I don't have any folders like that in my private/apps folder.This is all I have in there for some reason.http://i.imgur.com/1S48cCg.png (http://i.imgur.com/1S48cCg.png)http://i.imgur.com/kFvlenG.png (http://i.imgur.com/kFvlenG.png)Can anyone help? Is there somewhere I'm supposed to download the other files or...? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Droid15.24.3 [DELTA] on October 24, 2015, 05:21:30 PM I have a few questions regarding PSA editing. (Haven't done this in a while.)Can you make an event trigger:A.) When hit by being hit by a specific damage type?B.) When playing on a specific stage?C.) When fighting specific characters?Also, is it possible for Ice Climber type characters to have the second character only appear when a specific skin is selected? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: AlexHero8 on November 01, 2015, 01:38:32 AM The download is broken on Gecko OSI just got a new computer a month ago and decided to get back into SSBB Hacks and noticed the link is broken, I couldn't find any other one like it.If anybody can help me out getting Gecko Manager I would appreciate it. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Shoes Magoo on November 23, 2015, 05:35:58 PM Hello, and thanks for the guide. I am trying to apply the steps under section 6 A for disc updates. All of the instructions are pretty clear but I am missing something here:2. Launch the app through one of the methods explained above. If you're using the Homebrew Channel, rename the .dol file "boot.dol" and place it in a folder called "Preloader" in the "apps" folder of your SD Card. (In other words, your SD Card should look like apps > Preloader > boot.dol)I am using Homebrew. I downloaded the Preloader and have in it the "apps" folder in the root of the SD card (looks like SD card>apps>Preloader (folder)>Preloader (.rar), but I don't see any .dol file to modify. The Preloader file is a .rar and this is where my confusion lies. Can someone clear this up for me? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: UN on December 04, 2015, 01:40:47 PM Nice guide. Very good grammar. The tip about the Wii bricking is very helpful and strongly noted. So I need to install the 'HBC' before starting the game. Nice & simple guide, I will be returning here if I have any problems to check if I made a mistake. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: falcothefox on December 11, 2015, 04:19:31 PM How do i put item skins,i NEED to know,i promised my friend that i would.http://img03.deviantart.net/e7e7/i/2013/303/a/9/sfm___fox_scout_by_xtdawgx-d6scv38 (http://img03.deviantart.net/e7e7/i/2013/303/a/9/sfm___fox_scout_by_xtdawgx-d6scv38)  :ylink: :ylink: :roy: also if you can tell me how to put custom pictures in chats,thx. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Direact_N1 on December 27, 2015, 06:04:28 PM I downloaded Homebrew, I now have it on my Wii as a full channel, but which application should I use to put in some of the many hacks I downloaded in a physical, unaltered copy of the game?EDIT: I got Gecko to register on Homebrew. I'm still not sure how to get my characters and stages in from that point, though...DOUBLE EDIT: Turns out I needed to be using Riivolution for the type of modding I was interested in, so I went and got that. I got SMBZ Mario, Bomberman, and Charlotte in, but how do I put in Bomberman's portraits and character-specific sounds. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Direact_N1 on January 12, 2016, 05:17:45 PM Also, I got a shield mod, to make the shields all bubbly and stuff. I got a common3.pac, but if I put that in the System folder, it would overwrite another one I got with a Crash Bandicoot PSA. Do I need to make a sub-folder inside the System folder?I also downloaded the Smash 4 HUD. Where would I put that at? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: NStriped on April 23, 2016, 06:29:58 AM Hey, does anyone know how to load your own personal hacks (or from the forms) into dolphin and not a real wii? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Direact_N1 on May 05, 2016, 04:38:53 PM ...Does anyone know where to put codes at on Riivoloution? I've tried multiple ways, .gct editors, and codes, but that doesn't work. I even got premade .gcts and nothing changed...Post Merge: May 05, 2016, 04:42:26 PM...Does anyone know where to put codes at on Riivoloution? I've tried multiple ways, .gct editors, and codes, but that doesn't work. I even got premade .gcts and nothing changed... Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Rissian on June 01, 2016, 01:28:05 PM So I'm not exactly sure where I'm going wrong, I followed the guide to a tee Gecko OS, Softmodding and all. Everything works fine softmod wise but no matter what I do it's like the Wii Just ignores the brawl mods the names are all set correctly. I put my disc in the drive gecko loads the file patcher code and says it applied it the game starts, but nothing in game changes at all. I was attempting to use a texture mod for Lucas but it simply doesn't load the mod and keeps Lucas at his default look.The SD card I'm using is 2GB, the directories and everything are all set correctly last I checked.This is my directory setup.http://i.imgur.com/Ogy6xrI.png (http://i.imgur.com/Ogy6xrI.png)My brawl disc is NTSC-U. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on June 02, 2016, 02:26:06 AM Quote from: Rissian on June 01, 2016, 01:28:05 PMSo I'm not exactly sure where I'm going wrong, I followed the guide to a tee Gecko OS, Softmodding and all. Everything works fine softmod wise but no matter what I do it's like the Wii Just ignores the brawl mods the names are all set correctly. I put my disc in the drive gecko loads the file patcher code and says it applied it the game starts, but nothing in game changes at all. I was attempting to use a texture mod for Lucas but it simply doesn't load the mod and keeps Lucas at his default look.The SD card I'm using is 2GB, the directories and everything are all set correctly last I checked.This is my directory setup.[url]http://i.imgur.com/Ogy6xrI.png[/url] ([url]http://i.imgur.com/Ogy6xrI.png[/url])My brawl disc is NTSC-U.your path is Private > wii >app > RSBE01 > pf > fighter > lucasit should be private > wii > app > RSBE > PF > fighter > lucasyou just need to remove the text in red from the RSBE folder's name and they will workpretty good for a first shot at mods, usually first timers are way off  in their placementPost Merge: June 02, 2016, 02:30:05 AMQuote from: Direact_N1 on May 05, 2016, 04:38:53 PM...Does anyone know where to put codes at on Riivoloution? I've tried multiple ways, .gct editors, and codes, but that doesn't work. I even got premade .gcts and nothing changed...Post Merge: May 05, 2016, 04:42:26 PM...Does anyone know where to put codes at on Riivoloution? I've tried multiple ways, .gct editors, and codes, but that doesn't work. I even got premade .gcts and nothing changed...riivolution uses an XML to program the changes or swaps to be made and all without a GCT, for cheats in the mix, codehandler.bin and an xml to account for the gct must be added to the riivolution folder on the SD root, try downloading either riivo for gecko users, or one of the riivo for gecko users based hack packs then try again Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Rissian on June 02, 2016, 02:38:40 AM Well that did it, I thought I had to put in the whole game ID. Thanks a lot for your help! Now everything is working perfectly. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on June 03, 2016, 01:58:40 AM Quote from: Rissian on June 02, 2016, 02:38:40 AMWell that did it, I thought I had to put in the whole game ID. Thanks a lot for your help! Now everything is working perfectly.no prob. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Allbait on July 03, 2016, 08:39:17 PM Hey, does anyone have the last version of the ocarina code manager? The link on the resources page is dead and all other links I've found, including the one here, is of an old version that still has the 256 line limit which prevents exporting to GCT. Also I know that Brawlbox has it's own code manager but it has been giving me trouble so I'd rather just get what I am used to and hasn't failed me. Lost my files due to data corruption on my old HD. Tried going to the Wiird site but it keeps giving DNS errors, probably dead.Edit: Found a version (Though I'm unsure if its newer or older due to have been on a Japanese site without any version numbers) that does what I want it to!  :D Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Red Vanquish on August 13, 2016, 10:23:04 PM Hello? I have a question regarding the Module Editor.I am having problems with its Memory Viewer; when I open up section [8] of a module file, the file you need to change the ID slot for, the entire list is completely blank, no numbers and variables, nothing. What is going on? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Roadhog360 on September 14, 2016, 02:02:27 PM Hi! I use Riivolution on my Wii U. I see a few necro questions here, so I assume this post is okay.Basically, everything works, except codes, and Battlefield's SSS UI will not load.Please help! Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: RageQuitFails on September 26, 2016, 10:12:40 PM So i have a question on how to revert my Wii back to previous versions, if i even need to, i followed the instructions perfectly but preloader didn't come up so I'm confused and if it helps I already have homebrew on my Wii but nothing ever works for it. Whenever I try to do something in homebrew, it just loads for a second and then nothing happens. So I am stuck, if anyone can help me that would be amazing! Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Diddy Kong on October 14, 2016, 12:58:24 AM Quote from: RageQuitFails on September 26, 2016, 10:12:40 PMSo i have a question on how to revert my Wii back to previous versions, if i even need to, i followed the instructions perfectly but preloader didn't come up so I'm confused and if it helps I already have homebrew on my Wii but nothing ever works for it. Whenever I try to do something in homebrew, it just loads for a second and then nothing happens. So I am stuck, if anyone can help me that would be amazing!it may be possible that the apps or your sd card is corrupt, where stuff cant work, but not enough to stop reading itPost Merge: October 14, 2016, 12:59:55 AMQuote from: Roadhog360 on September 14, 2016, 02:02:27 PMHi! I use Riivolution on my Wii U. I see a few necro questions here, so I assume this post is okay.Basically, everything works, except codes, and Battlefield's SSS UI will not load.Please help!there are riivo hack packs i released in the past, and theres the riivo pack from beyondyou,  that can enable codes in riivolution,  for the SSS screen, common5_en.pac contains the stage select and char select assets, double check work placement and weather common5 should have _EN or not Title: Wanna hack but on an emulator Post by: Magicthunder on October 17, 2016, 08:53:58 PM So I've been wanting to hack Super Smash Bros. Brawl too, but I use an emulator to play it. I own two physical copies of the game and everything but I like having it on the go is all so I use Dolphin Emulator on my laptop to play. The thing is, as far as I know, it is possible to hack an emulated wii as you would a real one, though it is MUCH more complicated. I know my request my be a bit difficult or stupid but I really just want to know how to add songs into the game at the very least. A lesson on adding in characters and stages through cloning would be greatly appreciated as well, but really the only thing I completely want out of this is new music. Preferably without replacing any of the songs already in the game, so also through cloning if that's even possible... I just realized how difficult and demanding my request sounds, its not necessary for it to be accomplished, I realize this is a VERY complicated thing to ask and I was just shooting to see if I hit a mark. Just to summarize, I would like to be taught how to add music, characters, and stages (but mostly music) into brawl without replacing any of the main assets while also using an emulator as a wii instead of an actual wii. I have downloaded the Gecko OS, I can create virtual SD cards at will, the current one I use being 2 GB in size but I can create a smaller one if necessary, and I know how to run the Gecko OS in my emulator. Thank you for taking the time to read this, I hope someone can help me out here, or at least let me know if my extremely demanding request is a lost cause. Once again, thank you very much Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: spiderfreak1011 on December 30, 2016, 11:05:47 PM I had a question. I see a number of stage textures that i want to use tend to be ones that go over the Wifi Waiting Room Stage. But, i don't know how to really access that stage with hacks these days, especially considering Wifi only works with certain networks now. Could someone help me with this issue? One such stage i want to use that goes over the Wifi Waiting Room is this one in question: http://forums.kc-mm.com/Gallery/BrawlView.php?Moderated=All&Reported=All&Wifi=0&Featured=All&Name=The+Research+Facility&ByUser=&Credit=&Info=&AudioSource=&MainType=Stage&SubtypeSearch=and&Target=-1 (http://forums.kc-mm.com/Gallery/BrawlView.php?Moderated=All&Reported=All&Wifi=0&Featured=All&Name=The+Research+Facility&ByUser=&Credit=&Info=&AudioSource=&MainType=Stage&SubtypeSearch=and&Target=-1) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: YershiBear on January 15, 2017, 07:31:41 AM If anyone knows about this, please tell me: Where are Project M's stock image files? (You know, the images that show how many lives you have left in a match. I'm modding the game with costumes but cannot locate stock image files.) Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: ShadowX on January 18, 2017, 02:01:30 AM Quote from: YershiBear on January 15, 2017, 07:31:41 AMIf anyone knows about this, please tell me: Where are Project M's stock image files? (You know, the images that show how many lives you have left in a match. I'm modding the game with costumes but cannot locate stock image files.)"X:\projectm\pf\info2\info.pac" or "X:\projectm\pf\menu\common\StockFaceTex.brres". I don't remember which is the one for in-game stocks. Also, the stock icons in "X:\projectm\pf\stage\melee\STGRESULT.pac" are the ones on the results screen.Hope that helps! Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: spiderfreak1011 on February 14, 2017, 02:44:58 PM Alright so, i've had this problem ever since i started using GeckoOS, but it's pretty trivial, so, i haven't said anything of it up until now.Whenever i start up Gecko OS and Brawl with Hacks enabled, compared to when i start up Brawl normally in the Wii Menu, i notice something happens. Everytime i start it up with Gecko OS, the screen gains these Big Black Bars on the sides of the screen. When i start up normal Brawl, it just has the entirety of the game take up my screen, no bars or anything.This really bothers me because when i try to capture the footage and edit it, i have to zoom in the camera to not show the black bars and it hurts my overall quality because the pixels get blown up.They're really huge Black Bars on the sides too, each one makes up about an inch of length on either side, and from what i've scoured from the internet, no one seems to know of a way to fix this or if there's a version of GeckoOS that fixes it. So, i was hoping you guys could help. If i could even just reduce the length of the bars by half, i'm sure the quality would improve drastically. Can anyone help me?Post Merge: February 15, 2017, 02:29:23 PM^^ Actually nevermind, i don't need help with this anymore, friend helped me. But i do have this question i never figured out. Where do i go to find out how to use the Alloys in Brawl? I never found out what code or what to use to properly use them and such. Could anyone help me with that? Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: DariusHeywardBeh on August 26, 2017, 06:58:43 PM Question: I'm playing Project M Ex by ALM5252 and would like to replace some of the custom characters (Lara Croft, Zack Fair, Bass, Dark Knight, Federation Soldier) that were added using BrawlEx. I would like to replace them with other characters like SMBZ Mario (Mario PSA) etc. Can someone please help me with this? I've been stuck on this problem for quite a while and have no idea what to do. Thanks for your time and patience in advance. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Winterboydru on September 11, 2017, 06:13:00 PM hey i should be able to help pm me Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: Direact_N1 on December 11, 2017, 03:19:55 PM Is there any way to load Brawl mods without an SD card? I think my Wii stopped being able to read them properly, when I go to Homebrew, the loading symbol appears for about a second and doesn't load the mod channels. Title: Re: The Complete N00B's Guide to Brawl Hacking Post by: friendlyfamine on March 12, 2018, 12:29:28 PM Hi I have a problem. I think it's an easy fix, but I use Dolphin and recompiling hacks constantly is a chore, so it'd be really glad if someone could elighten me here.So I use PM 3.6 and have CBliss. I selected Bowser as a CPU and then loaded a stage. The stage loaded and my character did too. However, the game crashes as soon as Bowser's appearance is about to initiate. I tried using a different alt on Bowser but to no avail. I don't know why this happen but I have a few ideas:1. Bowser's Fit.pac or MotionEtc.pac is unstable2. Battle portrait issues (but I tried different alts and checked I had the files...)3. Bowser's models themselves.