Pre-Loaded SD Files For Project M On Dolphin Emulator

I have pre-created many of the files you must make in order to load and play Project M on Dolphin.

Make sure to follow this tutorial for any additional instructions.
Installing Project M on Dolphin: Tutorial

With these files you will not need the Easy SD image maker or WinImage. I have already done those steps for you.

The files are as follows.

An empty 2GB "sd.raw" file. This 11KB file WILL >>expand<< to 2GB once uncompressed.
This is if you want to custom-load an sd.raw file your own way. You will need WinImage.
-- www.mediafire.com/download/tybnigyqyjr7x32/

Similar to above, a 2 GB SD file pre-loaded with Project M. Unzip and place in the proper directory.
You do not need to download the blank SD files, WinImage or Project M by downloading this.
-- www.mediafire.com/download/a9ul3f05fu77hf0/ - (300 MB)
A 1 GB SD file pre-loaded with Project M.
-- www.mediafire.com/download/47cg763pj8dafmc/ - (300 MB)

Optional SD Card files.
-- An empty 1 GB "sd.raw" file. Compressed.
-- -- www.mediafire.com/download/3m5rc2a88s2b1d9/
-- An empty 512 MB "sd.raw" file. Compressed. (Note this will not hold Project M.)
-- -- www.mediafire.com/download/atzr98membyy4et/

My Project M setup folder. In case there's anything I missed here or if you would like to browse directly.
-- www.mediafire.com/folder/1n16rba1q05qo/

Cheers, and have fun Brawling.

	Author	Topic: Pre-Loaded SD Files For Project M On Dolphin Emulator (Read 14000 times)
0 Members and 1 Guest are viewing this topic.