Print Page - Help a Lady Out? (Porting Glitches)

Title: Help a Lady Out? (Porting Glitches)
Post by: Foxxy on September 27, 2011, 02:05:14 PM

Alright, so I have the following ports:

~~Sora over Rob~~ Simply needs a PSA finished
~~Naruto over G&W~~ Replaced with Naruto over DK
Naruto over Dk
~~Sasuke over Diddy~~ All issues fixed, PSA still needed though
~~Shadow over Olimar~~ Fixed all issues by removing Entry Data

Three questions.
Shadow - the red slot (FitPikmin01) keeps freezing when the fight starts. This occurs right after the stage loads but before it shows the characters and stage. I'm using the SA2 Super Shadow texture from the Shadow Recolor pack. Is this slot just broken because of the port or can I work around this?

Naruto - I know Game&Watch is tricky with textures. Can I have different textures or can I only have one? If I can have more than one, what would I name them? I would like to make some Sage Naruto/Minato costumes available, but right now I just have one working slot (FitGamewatch01)

Sora - Final Smash doesn't work. It either freezes, or cause a [censored]storm of exploding vertices and then Sora flying off screen. I don't think it's done on the PSA, is it possible to just make Marth's final smash port to Rob? If so, how?

Sasuke - Is there a PSA for him yet? I'd think there would be at least an ATTEMPT by now... ~~Also there's an issue with a few costume slots not working...~~

Other than that, the ports seem to work. Shadow can fight Sonic, Sora can fight Sephiroth (over Marth) as well as Sasuke, and Naruto can fight Cloud, with no graphical glitches or anything.

NEW ISSUE WITH NARUTO OVER DK
It seems porting Naruto over DK has some issues, and frankly, I don't know where to start. What would be the proper procedure to make this work? I'm using the CON Naruto PSA...

Thanks a bunch guys!

<3

~Foxxy

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Foxxy on September 27, 2011, 03:42:36 PM

Another issue, I just put Zero over Dedede, and am having some weird issues with the Final Smash freezing all opponents indefinitely... As well as Zero randomly flying up and getting stuck out of bounds... Help?

Screw Zero, too much of a hassle. Certain articles don't show up anyway, like the sword.

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: 8o8 Dark on September 27, 2011, 09:37:04 PM

I know for a fact the Mr. G&W can only have one texture (the one with 00). Normal GW textures can be edited through the G&Wer, but I don't really know about ports >.> Other than that, I don't know about the other two.

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Segtendo on September 27, 2011, 09:47:40 PM

I use Shadow over G&W, so the same rules apply for G&W textures.
You can only have one.

Also, welcome back Foxxy!

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Velen on September 27, 2011, 09:54:05 PM

The Zero over Dedede is a glitched port. I recommend using a different one.

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Foxxy on September 27, 2011, 10:04:43 PM

Thank you guys, I dropped Zero from the roster from the time being, and Naruto is moving over to Donkey Kong. I'm also adding Sasuke over Diddy but I'm gonna have to make custom animations for him.

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Foxxy on September 28, 2011, 10:50:53 AM

Bumping because I'm SURE that SOMEONE should know how to get around this... <_<

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Segtendo on September 28, 2011, 11:04:24 AM

Sasuke-There's no PSA, to my knowledge

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: DSX8 on September 28, 2011, 01:00:41 PM

Quote from: Segtendo on September 28, 2011, 11:04:24 AM

Sasuke-There's no PSA, to my knowledge

actually there WAS a Sasuke PSA in the works.. i have the beta version of it, but the maker put it on hold till he "learned to make better animations" so he says..

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Foxxy on September 28, 2011, 02:07:31 PM

Quote from: DSX8 on September 28, 2011, 01:00:41 PM

actually there WAS a Sasuke PSA in the works.. i have the beta version of it, but the maker put it on hold till he "learned to make better animations" so he says..

Any chance you could send that to me or give me the link to the original maker so I can ask for it? I would like SOMETHING to work off of... Or at least use for reference <_<

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Foxxy on September 28, 2011, 02:28:48 PM

Shadow issue was fixed, the shiny texture didn't work well with the Entry Data, so I used the no Entry Data code.

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Foxxy on September 28, 2011, 06:54:43 PM

New issue with Naruto guys, read OP...

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Segtendo on September 28, 2011, 07:05:11 PM

What are the issues with the Naruto over DK?
EDIT: Wait, I misread.
You can find an edited Ike .rel file that lets you port an Ike hack over a character.
It depends on the character though.

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: nanobuds on September 28, 2011, 07:52:41 PM

Quote from: Foxxy Azule on September 28, 2011, 02:07:31 PM

Any chance you could send that to me or give me the link to the original maker so I can ask for it? I would like SOMETHING to work off of... Or at least use for reference <_<

http://www.mediafire.com/?44y0w3cwf907zr3
i take no credit >.>

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Foxxy on September 28, 2011, 11:49:08 PM

Where would I find such a .rel Segtendo? And how would I edit it? T_T

Also, thank you Gh0st. If you can let me know who made that, that would be great. I wanna talk to them and see what they were basing the moveset off of, as well as give credit later on.

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Volt_Storm_7 on September 29, 2011, 12:10:45 AM

I have a PSA of sasuke, but I believe it isn't a official one. I just wonder if it's the one you're looking for.

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Segtendo on September 29, 2011, 06:54:04 AM

Quote from: Foxxy Azule on September 28, 2011, 11:49:08 PM

Where would I find such a .rel Segtendo? And how would I edit it? T_T

http://forums.kc-mm.com/index.php?topic=25005.0
http://forums.kc-mm.com/index.php?topic=14915.0
Some insight on this.

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Foxxy on September 29, 2011, 08:18:36 AM

Okay, so I see what I have to do.

What I don't get (and maybe I'm missing something easy) is how to patch the file. Is there a program? What does this garbley goop mean?

Code:

[0x000000] = Target Module Id
[0x01C248] = Target Module Id
[0x014080] = Target Character Id

I'm sure it says this basic stuff somewhere... But I could not, for the life of me, find something that says "Put the .rel into this program, find this, change it, then save it."

<_<

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Segtendo on September 29, 2011, 08:21:27 AM

I think you should ask someone to help you with this.
I have no clue how to change character modules.

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Foxxy on September 29, 2011, 08:23:56 AM

I found out that you need to use HxD...

So now I just gotta try and change the stuff...

I feel like I'm going into mildly uncharted territory with this stuff, or at least an unwanted zone of scariness lol

But if I can get it to work, maybe it'll be my first useful contribution to the Vault lol

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: nanobuds on September 29, 2011, 03:57:28 PM

Quote from: Foxxy Azule on September 28, 2011, 11:49:08 PM

SSJCerious

heres the thread:
http://forums.kc-mm.com/index.php?topic=21501.0

Title: Re: Help a Lady Out? (Porting Glitches)
Post by: Foxxy on September 29, 2011, 05:53:53 PM

Thanks ^_^

Ugh, I NEED TO FIGURE OUT THIS NARUTO PORT!

Kitty Corp Meow Mix Forums

Help & Tutorials => Help => Topic started by: Foxxy on September 27, 2011, 02:05:14 PM