idk what just happened,after putting in the last codes in the gct file so i can make a psa work but when i loaded the game with riivolution,it became a black screen which didn't load up the whole game since :srs: .So i took off the recent codes i had and left the old codes in gct file,then started the game again with riivo and it loaded up fine.But i have psas that need codes for it to work and have more codes all in one gct file,the game goes black before the strap menu shows up.So i was wondering if theres a possible way to have every code there is on one RSBE01.gct file without getting a black screen. :c
you can put a total of 256 lines of codes BUT if you have the gameconfig.txt in the root of your sd card then get however many you want
Quote from: -SSJ- on September 26, 2012, 05:57:05 PM
you can put a total of 256 lines of codes BUT if you have the gameconfig.txt in the root of your sd card then get however many you want
where in the root of sd card? I tryed it and it still dosen't work.
open sd card folder thing, and put it in there
not to complecated, btw, theres only one root of sd card
When using USB Loaders though, some of them are stuck with the 256 line limit, such as WiiFlow.
So there is a way to get rid of this 256 lines limit...
Where can i find this gameconfig.txt ? I have the configurable USB loader.
And i'm sure your problem is this limit, TheUnknownMan. I have experienced that too with a .gtc file which was too big.
http://www.smashmods.com/forum/thread-4850-post-85620.html#pid85620 (http://www.smashmods.com/forum/thread-4850-post-85620.html#pid85620)
scroll down and i guess you copy and paste this on your .txt
RSB?01:
codeliststart = 80570000
codelistend = 80580000
poke(800042B8, 60000000)
pokeifequal(803E9930, 4BFECA1D, 803E9930, 60000000)
pokeifequal(803E99A8, 4BFECA1D, 803E99A8, 60000000)
pokeifequal(803E9D5C, 4BFECA1D, 803E9D5C, 60000000)
then save as gameconfig.txt, idk if it works but if it does, let me know and i'll test it myself.
Oh wow... tested and approved ! It works perfectly for me.
Thanks for this and give it a try, just put gameconfig.txt into your SD card and NOT into a folder. Don't forget to replace the "?" in RSB?01 by either "E" (NTCS-US) or "P" (PAL).
just tested it, still dosen't work....
I don't know how to help you, sorry...