Kitty Corp Meow Mix Forums

Help & Tutorials => Programming Tutorials => Topic started by: Yosh1Kart on August 27, 2011, 10:09:06 AM



Title: How to get Alloys on your wii (not over a character)
Post by: Yosh1Kart on August 27, 2011, 10:09:06 AM
Hi everyone! YoshiKartWii again,
and now i have a tutorial! :D
because, this is how i helped someone get into hacking so, i thought "why not let others find a way the same way i got that person"
ok, so here is how to get Alloys

you use codes and only codes,
go to this thread here (http://forums.kc-mm.com/index.php?topic=6201.0)
you should find the correct codes,
and a good CSS that has alloys, sheik, Zero suit samus, wario man, and giga bowser as choices ON the CSS!

but, if you feel to confused by it,
(i did at first)
just Post here or PM me :)
i'll give you codes that'll have the right ones

FIRST!

do you have "code manager"?
if you don't, you need it to have/use codes
you can find it and alot of stuff you may need for hacking right here (http://forums.kc-mm.com/Gallery/Resources.php)
get the codes from there, put them in your computers notepad,
save the notepad,
and open the notepad in code manager

SECOND!

you should have codes in the codes folder on your SD card
so it should be inside SD card\codes\(GCT goes here)
you need them there for the codes to work,
if you don't have a codes folder, you should make one on the main part of your SD card

THIRD!

name the codes the name of your game's ID
here's a pic to show you where to find it
http://img84.imageshack.us/img84/6697/92851867606back.jpg
it says RSBE you should name it what yours says but end it with 01
so for example it'd look like RSBE01

FOURTH!

once you get those working,
MAKE SURE you put the CSS from that thread i gave you a link to (the one you downloaded)
make sure you replaced the sc_selectcharacter_en inside your common5.pac
with the one you got from that thread
(you really need the CSS to play alloys, giga bowser etc.)
here (http://www.mediafire.com/?mdtddxcmaly) is the link to the common5.pac if you don't have one
just open brawlbox, right click the sc_selectcharacter_en inside your common5.pac and choose replace

AND LASTLY!

have fun with them :D



i might update this with a picture by picture tutorial for the ones that might be too confused by this


Title: Re: How to get Alloys on your wii (not over a character)
Post by: Spectre370 on September 05, 2011, 03:38:23 PM
The codes confused me, Custom CSS is in V3 now and it also does not seem to work very well in riivolution, which I need it to. It would have been better to personally post everything necessary and give credit to who it belongs to.


Title: Re: How to get Alloys on your wii (not over a character)
Post by: Yosh1Kart on September 05, 2011, 03:56:25 PM
The codes confused me, Custom CSS is in V3 now and it also does not seem to work very well in riivolution, which I need it to. It would have been better to personally post everything necessary and give credit to who it belongs to.
Well, it's not my decision on what CSS you download :-\ (red, purple, blue)

but it you want i can PM you the right codes

and don't worry, they confused me at first too :)
but after a little bit of help, i knew it! :D


Title: Re: How to get Alloys on your wii (not over a character)
Post by: Parvati ~ <3 on September 13, 2011, 10:31:02 PM
 Thank you Yoshi ;)


Title: Re: How to get Alloys on your wii (not over a character)
Post by: BNuge on July 27, 2012, 04:08:29 PM
I already have a CSS with Zelda/Sheik separated, Samus/ZSS separated, Pokémon Trainer and each of his Pokémon separated (so there are 4 total slots- normal trainer, squirtle alone, ivysaur alone, charizard alone).... I think that's it.  I got the file from one of my friends, so I don't know what exactly he did. 

Point is I want to add the alloys to the stuff I already have.  I've been looking around trying to figure out how to do this. 


Title: Re: How to get Alloys on your wii (not over a character)
Post by: SonicBrawler on July 27, 2012, 06:15:40 PM
I wish I had this when I started hacking lol. Great tutorial


Title: Re: How to get Alloys on your wii (not over a character)
Post by: Yosh1Kart on July 27, 2012, 08:47:31 PM
Last post was in September, so that's necro-posting, but I'll bump the thread so you don't get warned
 
*bump*

And thanks, glad it could help :)


Title: Re: How to get Alloys on your wii (not over a character)
Post by: BNuge on July 27, 2012, 08:52:39 PM
Last post was in September, so that's necro-posting, but I'll bump the thread so you don't get warned
 
*bump*

And thanks, glad it could help :)

Yeah I questioned it, but I thought it might be okay rather than starting a new topic to respond to this one.  Any idea how complicated it would be to add the Alloys (see my previous post)?


Title: Re: How to get Alloys on your wii (not over a character)
Post by: Yosh1Kart on July 27, 2012, 09:01:11 PM
Yeah I questioned it, but I thought it might be okay rather than starting a new topic to respond to this one.  Any idea how complicated it would be to add the Alloys (see my previous post)?
you'd need the codes to play as them,
if you want I can PM you those specific codes
(I'll post them here and add to OP tomorrow if I get the chance)
but I'd have to PM you them tomorrow seeing I'm on my tablet and it's a pain to copy stuff on it lol