Brawlbox Resources & History

[DarkPikachu]

G&W being the result of a process, apparantely this rasterizer, rather than a scale Z to 0 seems about right. Not only does he have an extra polygon for the outline effect, he actually has two extra polygons, the same exact size. Might this have something to do with this clipping effect and drawing order mentioned?

Also, riivolution is harder to set up but worth it. There's a whole new world of Brawl hacks with custom sound effects, after all.

I've always had sfx replace for me :/

IDK... maybe it's just my wii...
or maybe my brawl disk...
(I've got one of the very first releases)

EDIT: @Nymph:
if you wish to learn hex,
I'd reccomend loading HexEdit4.0 with one of my templates

you should fully understand hex once you've used that

[Sky Grounder]

Also, riivolution is harder to set up but worth it. There's a whole new world of Brawl hacks with custom sound effects, after all.

Also, there's something called RiiFS, which is a riivolution server that you can use to connect to the wii.
With that, you can stream hacks to the wii from the PC. It's quite convenient for testing hacks as you can just update the file while in-game, and allows for seeing changes without having to turnthe wii off/on

Also, I wish I could somehow help you guys.

[♤♡◇♧]

In order to change Jiggz result name, open up main.dol in a hex editor and search for 'Jigglypuff', which should take you to a section with most of the result names (be aware that the size of the name has to stay the same size, so Jigglypuff, being 10 characters, being replaced with a 10 character name or less with spaces to fill the remaining spots).

And I think G&W's Z-axis is 0 due to the fact that sometimes, when you throw his and he faces the screen with his mouth open, you will be able to look through him through that part.
And like Tcll mentioned, his Z-axis is forced to be 2D through the stages Z-axis rather then his own Z-axis (as that would have him flip like when Mario would turn around in Paper Mario).

[Infernape]

i found it but wheres is marth? D:

Edit: Nevermind....

[DSX8]

EDIT: @Nymph:
if you wish to learn hex,
I'd reccomend loading HexEdit4.0 with one of my templates

you should fully understand hex once you've used that

HexEdit4.0 ehh.... PM it to me mate

[Xiggah]

In order to change Jiggz result name, open up main.dol in a hex editor and search for 'Jigglypuff', which should take you to a section with most of the result names (be aware that the size of the name has to stay the same size, so Jigglypuff, being 10 characters, being replaced with a 10 character name or less with spaces to fill the remaining spots).

And I think G&W's Z-axis is 0 due to the fact that sometimes, when you throw his and he faces the screen with his mouth open, you will be able to look through him through that part.
And like Tcll mentioned, his Z-axis is forced to be 2D through the stages Z-axis rather then his own Z-axis (as that would have him flip like when Mario would turn around in Paper Mario).

That name limit can likely be shortened, but not lengthened. Maybe we need to parse the main.dol too >.>
I just checked up on the answer to seeing through his mouth. He has no polygons inside his mouth and his polygon faces aren't double-sided, it's on his polygon78. I think he has two separate polygons for his outline effect, one on each side, which would explain why culling isn't an issue if he's at 0.

HexEdit4.0 ehh.... PM it to me mate

I won't say I don't know hexing, but a nice GUI might help me cross the gap and tackle file parsing. Thanks for the suggestion!

[Infernape]

Mission Complete.

[libertyernie]

I have some problems with making stages in recent versions of BrawlBox - sometimes with 0.65 it corrupts one of the models when saving. (stage builder models) I've been using 0.63 for making my stages.

[DSX8]

just stopping by to say that i have figured out the SRT0 heading.. quote from my last post on last page:

offset 0x0C: SRT0 Version#
Offset 0x1A-0x1B: Unknown1 (no known data yet)
Offset 0x1C-0x1D: FrameCount
Offset 0x1F: How many materials it should affect.
Offset 0x20-0x24: Unknown2  (no known data yet)
Offset 0x26-0x2F: Unknown3  (which can either be set to 0 or 1 for looping)

[pikazz]

just stopping by to say that i have figured out the SRT0 heading.. quote from my last post on last page:

you know there is an wiki about SRT0? :3

and also, I have looked into SRT0 myself and knows at least 65-70% of it

[DSX8]

you know there is an wiki about SRT0? :3

and also, I have looked into SRT0 myself and knows at least 65-70% of it

yeah i kno bout it, but thats like not even complete isnt it? and my findings were for the SRT0 header

[Xiggah]

yeah i kno bout it, but thats like not even complete isnt it? and my findings were for the SRT0 header

Completing it would be great: That's also something people could try out if they were looking for new ways to help... Sky Grounder?

[Sky Grounder]

Completing it would be great: That's also something people could try out if they were looking for new ways to help... Sky Grounder?

I have time for it tomorrow and in the weekend if you want help

[pikazz]

I can always go for a hunt in SRT0's file :3

[DSX8]

I can always go for a hunt in SRT0's file :3

as can i