Hmm. Are there any .Rel files missing?

Did you put them in the right place? It's easier just to use a SD card. If you're running Dolphin you can set a virtual SD up with WinImage.

Hm the rel files are supposed to be in the iso no?

Hello when I import no matter what psa with Wii scrubber (PAC And PCS) when I select the character the game and then a stage the game freezes I have to hard reset. Anyone can help?

Anybody have this i cant find it and kcmm partition pal is broken

I have a fresh ISO of ssb and I have a little Mac psa over jigglypuff so I will replace the Pc's and pac's over jigglypuff so after I use it on my Wii and I don't have jigglypuff I need to unlock him to use him right?

I have a little mac psa and i was wondering how i add sfx to him the download came with it a sawndz file so how i do it

I finally figured out how to set up sd-required mods on Dolphin.

You will need the following:

1. Dolphin emulator (obviously)
2. Virtual SD Card Maker
3. ImDisk
4. Gecko OS (1.9 or later)
5. Brawl ISO (NTSC)
6. Mod of your choice (MUST be Dolphin-compatible)
7. Ability to follow instructions EXACTLY
8. Ability to tolerate long-winded posts like this one (LOL)

1. Assuming you've already downloaded everything in the above list, create a 2 GB sd.raw file using Virtual SD Card Maker. It will appear in your Dolphin Emulator folder, inside the Wii sub-folder.

2. Mount the sd.raw file as a virtual disk using ImDisk. Right-click the new drive letter that pops up and select Properties from the context menu that pops up. Navigate to the Policies tab, and uncheck the box beside "Enable Write-caching". This will make sure the contents of this disk do NOT "disappear" (but still take up space) when you unmount it.

3. Make a new folder and name it "codes" on the root of your virtual disk. Copy-paste your desired mod's codes into that folder, noting what controller type you intend to use.

4. Copy-paste your desired mod's Private folder and gameconfig.txt to the root of your virtual disk.

5. If needed, copy-paste your desired mod's st folder into your virtual disk's rsbe folder (only needed if using a BrawlEx mod, I think). Make sure to unmount your virtual disk, or else the codes won't show up (you'll end up just playing default-settings Brawl).

6. Copy-paste the Gecko OS boot.elf file to the same folder as your Brawl ISO. Make sure Dolphin's ISO directory is set to detect your ISO's location.

7. Right-click your Brawl ISO icon and set it to your Default ISO.

8. Open Gecko. Set the default hook type to either OSSleepThread or AxNextFrame. Make sure the SD Cheats option is set to "Yes" or "On".

9. Select Launch Game.

10. BRAWL!

Hi will a brawl iso work instead of a disc for geckos btw im not using dolphin emulator just a wii hacked one i mean playing brawl off usb device

I have just installed a little mac psa in my sd card and i need a RSBP01 gct file for pal (im a pal user) for  the File Replacement Code (for textures, models, music, etc.) To make it short I need a gct pal codes to load textures and CSS everything I mean thx

The code I provided is ready to use with the code manager in the "Resources" section of this forum. It takes a list of codes from a .txt file and converts it into a .gct. I highly recommend using this program.

If you don't know what codes your .gct contains you can follow this thread to simply add your code to an existing .gct
http://smashboards.com/threads/how-do-i-add-more-codes-to-an-existing-gct.303520/

The code I provided is ready to use with the code manager in the "Resources" section of this forum. It takes a list of codes from a .txt file and converts it into a .gct. I highly recommend using this program.

If you don't know what codes your .gct contains you can follow this thread to simply add your code to an existing .gct
http://smashboards.com/threads/how-do-i-add-more-codes-to-an-existing-gct.303520/

Is it fine if i import this codes to a pal version of brawl if not can u give me a gct one pal and pal codes to put it in them thx

Can't. Still against the rules, even in PM's. Thems the rules of the forums.

Facebook maybe

[Post Merge: January 24, 2016, 01:01:11 PM]

i have a gct file but how i put these codes in it do i need a programme or something thx
Post Merge: January 24, 2016, 01:01:11 PM

Yes, include this code in your .gct file

SDHC Extension 1.1[Bero]
* C23CB3D8 00000004
* 546302D7 41820014
* 38600001 3C808058
* 60840300 90640000
* 2C1D0000 00000000
* C23EEE18 00000007
* 80610014 54630253
* 41820028 38000009
* 8061000C 5463C43E
* 38630001 1CC30400
* 3C60803E 6063EE58
* 7C6903A6 4E800420
* 80A1000C 00000000
* C23CB620 00000008
* 3D60805A 616B9350
* 816B0000 2C0B0000
* 41820024 2C040040
* 4182001C 39600001
* 91610008 3D60803C
* 616BB410 7D6903A6
* 4E800420 9421FFC0
* 60000000 00000000
* C23CB4AC 00000003
* 38C00000 2C160000
* 41820008 38C00001
* 60000000 00000000
* C23CB5D4 00000009
* 807C001C 2C030001
* 806DCE1C 41820034
* 80030000 90190000
* 80030004 90190004
* 80030008 90190008
* 8003000C 9019000C
* 3C60803C 6063B5E0
* 7C6903A6 4E800420
* 60000000 00000000
* 043EEA20 48191905
* 043EEC1C 48191709
* 06580324 00000028
* 3F008058 63180300
* 83180000 2C180000
* 4182000C 7CB92B78
* 48000008 7F2531D6
* 548006FF 4E800020
* 043EEB6C 481917E1
* 043EED68 481915E5
* 0658034C 00000028
* 3C608058 60630300
* 80630000 2C030000
* 4182000C 3B390001
* 48000008 7F39BA14
* 4E800020 00000000
* 043CBA24 481B48E1
* 043CBD60 481B45A5
* 06580304 00000020
* 3EC08058 62D60300
* 82D60000 2C160000
* 41820008 7C802378
* 7C040040 4E800020
* C23EE0BC 00000003
* 38000000 3C60805A
* 60639350 90030000
* 3C60805A 00000000

Yes, include this code in your .gct file

SDHC Extension 1.1[Bero]
* C23CB3D8 00000004
* 546302D7 41820014
* 38600001 3C808058
* 60840300 90640000
* 2C1D0000 00000000
* C23EEE18 00000007
* 80610014 54630253
* 41820028 38000009
* 8061000C 5463C43E
* 38630001 1CC30400
* 3C60803E 6063EE58
* 7C6903A6 4E800420
* 80A1000C 00000000
* C23CB620 00000008
* 3D60805A 616B9350
* 816B0000 2C0B0000
* 41820024 2C040040
* 4182001C 39600001
* 91610008 3D60803C
* 616BB410 7D6903A6
* 4E800420 9421FFC0
* 60000000 00000000
* C23CB4AC 00000003
* 38C00000 2C160000
* 41820008 38C00001
* 60000000 00000000
* C23CB5D4 00000009
* 807C001C 2C030001
* 806DCE1C 41820034
* 80030000 90190000
* 80030004 90190004
* 80030008 90190008
* 8003000C 9019000C
* 3C60803C 6063B5E0
* 7C6903A6 4E800420
* 60000000 00000000
* 043EEA20 48191905
* 043EEC1C 48191709
* 06580324 00000028
* 3F008058 63180300
* 83180000 2C180000
* 4182000C 7CB92B78
* 48000008 7F2531D6
* 548006FF 4E800020
* 043EEB6C 481917E1
* 043EED68 481915E5
* 0658034C 00000028
* 3C608058 60630300
* 80630000 2C030000
* 4182000C 3B390001
* 48000008 7F39BA14
* 4E800020 00000000
* 043CBA24 481B48E1
* 043CBD60 481B45A5
* 06580304 00000020
* 3EC08058 62D60300
* 82D60000 2C160000
* 41820008 7C802378
* 7C040040 4E800020
* C23EE0BC 00000003
* 38000000 3C60805A
* 60639350 90030000
* 3C60805A 00000000

So how can i edit a gct file and do i need to remove the spaces

Im running the game throu usb loader GX and i have a little mac psa and i have a 4 gb sdhc card but people say u need 2 gb is there anyway i can get the psa to work with a 4 gb one

I

Distributing the Brawl ISO here is illegal, and it's only allowed on ISO/ROM-distributing sites, which we cannot link to or anything like that. In fact, Google-searching will probably get you nowhere, as populalr Wii ISOs are hard to find online. So here's something that you can do to get you the ISO, without getting one online. Note: The below spoiler also contains information about how to put the Little Mac files into the ISO.

Download this and follow this tutorial(Where it documents how to use Clean Rip; the rest of the tutorial you don't need to know for these next steps, as they're unrelated)

Put the .iso and the .pac's and .pcs's in a folder for modifying the .iso.

Download Wii Scrubber(It's in the Resources section of kc-mm), and put it in the same folder as the .iso and the other files. Open WIIScrubber.exe. Click "Load ISO" and select the Brawl .iso. It will give warning messages, but you can ignore these, as they won't affect this. Just hold down "Enter" until the messages go away. Expand "Data Partition 2" and "Fighter" and then "Purin" to find the various fighter files. Right-click each one and click "Replace". Make sure to replace each one with the corresponding name.(i.e. FitPurin00.pcs, FitPurinMotionetc.pac, etc.) Now it should say something about re-compiling and give the same warning messages when you initially opened the .iso. It should automatically save the replacement when you finish pressing "Enter" for all of the warnings and the .iso loads. Then just click "Yes" when it asks if you're sure you want to quit, and there's your ISO with Little Mac's PSA and Skin(s).

As for how to make textures, just use a program called BrawlBox, along with my tutorial that's in my sig.

As for SFX, that I don't know about.

Also, are you requesting any of this, or does it actually already exist? Because you should ask for this in the Request sub-forums.

Might you do it for me please because there are alot of errors in my pc and i need direct iso we can use any other site or pm me the iso

Hello everyone and the mighty hackers of ssb i want to request something if you can do it i would greatly appreciate it since i dont know how to hack for textures and other things Can one of you make an iso with a little mac psa there is someone who made this psa here and it looks AMAZING
https://www.youtube.com/watch?v=jVQNJtuzacw
to make it short im looking for a ssb brawl iso with little mac over jigglypuff
And if you can put to him everything like his alternate uniforms and his sfx and everything i would greatly appreciate it he has 6 alternate uniforms thank you.sry for my bad english